NOTES ON HOW TO USE
Charge your electric toothbrush before its first use for a minimum 16 hours. After a complete charge cycle attach the brushhead with a colour ring of your choice. Position the brushhead with the head pointing in the same direction as the switch.
Select one of the 4 possible positions respectively by activating the “I” button.
Press 1 x = „Fast“ speed with
Press 2 x = “Slow” speed with
Press 3 x = Massage function with
Press 4 x = Off
Button 0 = Off
“0” is the Reset/Off switch. Press for immediate reset or to turn off your electric toothbrush.
Massage function: The brush head alternately runs 3 seconds at fast speed and 3 seconds at slow speed to generate a soft massage function for your gums.
Thoroughly rinse your mouth before brushing your teeth and moisten the brushhead. Use any regular toothpaste. Turn on the electric toothbrush after pointing the brushhead toward your teeth. This pre- vents splashing. Move the brushhead to start with along the chewing surface of your teeth. Then continue with the outer and inner sides of your teeth. Be sure to reach the interdental spaces and all gum areas. It is not necessary to apply pressure onto the toothbrush. Brush your teeth for a minimum 2 minutes to thoroughly remove plaque. Rinse your mouth again thoroughly after brushing your teeth. Bleeding gums may occur during the first few days of use, especially if the user generally tends to suffer from bleeding gums. This bleeding should cease after a few days. If the bleeding persists for more than two weeks, consult your dentist.
Clinical research has shown that the best cleaning results are obtained if
7