ENGLISH
12REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching 
and 
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyMake sure to point the remote control to the remote control sensor on the monitor set.
(POWER)
Turns the monitor set on or off.
MONITOR ON
Turn on the monitor.
MONITOR OFF
Turn off the monitor.
1/a/A Button Toggles between numerical and alphabetical.
ARC
Selects the Aspect Ratio
Mode.
Volume Up / Down 
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
MUTE 
Mutes all sounds.
ENERGY SAVING(
) Adjusts the brightness of the screen to reduce energy consumption.
INPUT
Selects the input mode.
3D
This button selection is not applicable.
Number and Alphabet buttons |
Enters numerical or alphabetical |
characters depending on the |
setting. |
CLEAR
Deletes the entered numerical or alphabetical character.
BRIGHTNESS Key Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.