LG Electronics 42LS35A, 65LS33A Network Status, Tips for Network setting, Ting the network

ENTERTAINMENT 21

NOTE

yyIf you want to access the Internet directly on your display, the Internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applica- ble terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. yySome internet connection operations may not

be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon sibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a router may not be allowed or its usage may be limited depending on the poli- cies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press SETTINGS to access the main menus.

2Press the navigation buttons to scroll to NET- WORK and press OK.

3Press the navigation buttons to select Network Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option	Description
Setting	Return to the network setting menu.
Test	Test the current network status after set-
	ting the network.
Close	Return to the previous menu.

ENGLISH