Set up the preferable time to turn off the power by using the “+” key or “=” key while the display is showing as picture No. 2. Complete the procedures to set up the time using the “M” key. Not pushing the “M” key does not save this function.
z The scale is automatically turned off when not being used for selected time without inputting a key or changing the weight. z Used in order to prevent unnecessary consumption of the battery.
z Select time to automatically turn off the power as OFF – 5min.- 10min. – 30min. – 60min. – 120min. z Release the time setup by setting up with ‘OFF’.
z Without inputting a key for 5 seconds will automatically set back to the scale mode in the picture No. 2.
z The scale is dispatched with ‘5 minutes automatic turning off the power’ mode. (The scale is automatically turned off when not being used
for 5 minutes.)
W eighing range :40 g ~ 6/15 kg,e = d :2 g / 5 g
(0.1 lb ~ 15/30 lb,e = d :0.005 lb/0.01 lb)
Model : CB-15N
BAT
g/pc
TOTAL lb
UNIT WEIGHT
pcs
Short
Q'ty
Short
Unit Wt.
QUANTITY
kg
ZERO TARE
WEIGHT
W eighing range :40 g ~ 6/15 kg,e = d :2 g / 5 g
(0.1 lb ~ 15/30 lb,e = d :0.005 lb/0.01 lb)
of the scale are zero state and Tare is released as the picture No. 1.
kg
pcs
g/pc
■Procedures to set up time to automatically turn off the power
-Push the “C” key for 5 seconds while the weight, quantity, unit weight
-
-
WEIGHT
ZERO
TARE
QUANTITY
Short
Q'ty
Short
Unit Wt.
UNIT WEIGHT
TOTAL lb
BAT
Model : CB-15N
7. Error Indication and its Information
Error | Information | Solution | Error | Information | Solution |
Err-01 | Memory reading error | A/S | Err-02 | Zero range error (Test mode) | A/S |
Err-03 | Problems in Weighing range (Test mode) | A/S | Err-d0 | Exceed maximum weight | Check the platform, A/S |
Err-d1 | Below minimum weight | Check the platform | Err-d2 | Problems in AD converter | A/S |
Err-d3 | Tare range error: Unstable condition, Exceed | Check the scale | Err-d4 | Exceed maximum data range of AD | Check to see if there is anything |
| tare range, Setting up the Tare during “- | | | converter | on the platform, A/S |
| (minus)“ weighing | | | | |
Err-d5 | Below minimum data range of AD converter | Check the platform, A/S | Err-d6 | Weighing range error | A/S |
Err-d7 | Problems in Zero / Exceed the range | A/S | Err-d8 | Not in a stabilized condition | The scale is experiencing |
| | | | | vibrations or wind currents : Place |
| | | | | the scale in a stabilized condition |
-When the scale stops operating or ON/OFF key does not operate
-Reset the battery or adapter jack. When they do not operate after resetting the battery or adapter jack, claim the after service.
