Grizzly T10007 owner manual Safety Instructions for Crane Scales

Page 3

Safety Instructions for Crane Scales

1.READ THROUGH THE ENTIRE MANUAL BEFORE USING. This crane scale presents serious injury hazards to untrained users.

2.NEVER ALLOW UNQUALIFIED PERSONNEL TO SERVICE THIS SCALE. Servicing the scale incor- rectly may reduce the maximum holding capacity of the load cell or cause the scale to give incorrect readings, which may result in over- loading.

3.DO NOT LIFT MORE THAN THE MAXIMUM SUGGESTED CAPACITY. Be aware that the load weight, harnesses and load bear- ing equipment all contribute to the total load weight. Overloading may cause the load to fall.

4.NEVER LIFT HEAVY LOADS WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when lifting or moving heavy loads.

5.ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PER- SONNEL TO OPERATE SCALE. Make sure operation instructions are safe and clearly understood.

6.NEVER LEAVE A LOAD WHILE SUSPENDED. Lower the load to the ground and un-hook all loads and harnesses before leaving the crane scale unattended.

7.NEVER SUSPEND THE LOAD OVER OR NEAR A PERSON. Loads may fall at any given time due to overloading, improper load- ing procedures, or failure of a com- ponent.

8.ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING. Make sure switch is in OFF position, charger is unplugged, and battery disconnected before servicing.

9.CHECK FOR DAMAGED PARTS BEFORE USING SCALE. Check for broken parts, loose bolts, cracked or worn components and any other conditions that may affect machine operation. Repair or replace damaged parts.

10.USE RECOMMENDED ACCES- SORIES. Refer to the instruction manual for recommended acces- sories. The use of improper acces- sories may increase risk of injury.

11.NEVER LET LOADS SWING. Unsteady loads may become unbal- anced and fall. Swinging motions cause wear on components and may cause them to break.

12.USE CORRECT HARNESSES. Never use oversized or multiple harnesses.

13.CHARGE ONLY USING THE SUPPLIED CHARGER AND BATTERY. Do not use with other batteries, chargers or scales.

14.DO NOT EXPOSE BATTERY OR CHARGER TO WET OR RAINY CONDITIONS. Moisture greatly increases the risk of a shock haz- ard.

15.DO NOT STORE BATTERY WITH CONDUCTIVE MATERIALS. Storing the battery in a box of screws or nails can cause shorting across the battery poles.

-2-

Model T10007 300 Kg Digital Crane Scale

Image 3
Contents Model T10007 Kg Digital Crane Scale Safety Before Operating This EquipmentMation about proper operation of the equipment Safety Instructions for Crane Scales Introduction Foreword Contact InfoMachine Data SET UP Unpacking Site ConsiderationInventory Scale front view measurements Mounting and Loading HardwareScale Functions OperationsLb/Kg Conversion Remote Control FunctionsOverload Warning Turning the Scale OFFHold Function Scale BatteryTo recharge the battery Advance Tare WeightFuncti on Button Di spl ay Acti on Reference GuideGeneral MaintenanceTroubleshooting ServiceDescription T10007 Parts BreakdownWarranty