EXCELL PRECISION CO., LTD.
OPERATION
1. DISPLAY BACKLIGHT
Press the
.
.
.
^ / 
key to choose the desired display backlight mode:
⇒ “Auto Backlight” mode. When the weight is over 10 divisions or any key is pressed, the display backlight will be switched on. When the weight returns to zero or the weight on platform is less than 10 divisions, the display backlight will switch off after 5 seconds.
⇒ Display backlight is on all the time. ⇒ Display backlight is off.
2. ZERO
Press the
→0←
key to
the (à0ß) symbol will be displayed.
3. WEIGHING MODE
(1). Units Selection
1. Press the
UNITS
key in the weighing mode to choose the desired weighing unit and the
display will show the “kg” or “lb” symbol on the top right of the LCD display.
2. The unit status will be memorized when turning the machine off.
(2). Totalising
1. The scale allows the next totalising operation, even when the weight value does not return
back to zero. The
M+
key is functional, when the weight value changes by more
than 10 d. The scale will store the totalised weight value after the weight is stable.
2.The scale can totalise positive or negative weight but not both at the same time. The totalised weight store must be reset to zero before it is possible to select positive or negative totalising mode.
V1.1 | 8 | ZSME300000011 |