Excell Precision WEIGHING SCALES manual Specifications, Power Consumption, LOW Battery Warning

Page 7

EXCELL PRECISION CO., LTD.

2. SPECIFICATIONS

The available capacities for selection are different and depend on various models:

Capacity

 

Division

3 kg (6 lb)

 

0.2 g (0.0005 lb)

6 kg (12 lb)

 

0.2 g (0.0005 lb)

7.5 kg (15 lb)

 

0.5 g (0.001 lb)

15 kg (30 lb)

 

1 g (0.002 lb)

30 kg (60 lb)

 

2 g (0.005 lb)

75 kg (60 lb)

 

5 g (0.01 lb)

150 kg (150 lb)

 

10 g (0.02 lb)

300 kg (600 lb)

 

20 g (0.05 lb)

600 kg (1200 lb)

 

50 g (0.1 lb)

Operating Temperature: 0°C ~ 40°C (32°F ~

104°F)

OIML: -10°C ~ 40°C (14°F ~ 104°F)

Power Source: AC 110V/220V (±10%) + DC 6V/4.5AH Rechargeable Battery

Display: LCD, 6 digits, 25 mm (Height), EL backlight

3. POWER CONSUMPTION

1.The power consumption is around DC 20 mA (system + load cell), the rechargeable battery can be used up to 200 hours.

2.The power consumption is around DC 67 mA (system + load cell + backlight), the rechargeable battery can be used for 60 hours approximately.

3.The power consumption is around DC 71 mA (system + load cell + backlight + RS-232), the rechargeable battery can only be used for 56 hours approximately.

4.LOW BATTERY WARNING

Please note when the

symbol is shown on the display, the internal battery needs to be

recharged.

 

vThe scale will power off automatically without recharging after the low battery symbol shows upon for 20 to 30 hours (3 to 5 hours if the backlight is active) on the display. As a recommendation, the scale must be fully recharged before operating the scale again.

V1.1

5

ZSME300000011

Image 7
Contents Digital High Precision Weighing Scales Page Table of Contents Relay Output Preparing to USE the Scale Before Using the ScaleIntroduction FeaturesPower Consumption SpecificationsLOW Battery Warning LOW LCD Display SymbolsUnits Keyboard FunctionZero Weighing ModeOperation Display BacklightII. Recall Totalised Weight Values Weight TotalisingIII. Clear Totalised Weight Values III. Clear the semi-auto tare Deduction of the Container WeightWeight of the container is unknown Tare II. Recall the semi-auto tare valueRecall the pre-set tare value IV. The weight of the container is known Pre-set tareVI. Clear the pre-set tare value Check Weighing Buzzer SettingClear the check weighing settings IV. Recall the check weighing settingIII. High/OK/Low indications Sampling Counting FunctionConfiguration Settings Actiondisplay Description CHECK-WEIGHING ConfigurationRS-232 Setting Exit Configuration Settings RS-232 25 Pin ‘D’ type Pin Description RS-232 and Relay Output RS-232 or Serial Printer OutputRS-232 Interface Format Transmission example Data Format+100.0 kg Key to Connection Illustration Relay OutputRelay Output Relay Pin DescriptionConnection Setting Power Source Illustration