(1) Time mode
Time setting:
Hold SET for about 2 seconds to enter into Time Mode and set the 12
this mode, press the | / | key. After the setting, press SET to save and enter into the hours setting. |
To set hours, press | / | to change hour. After the setting, press SET to save and enter into the |
minute setting. To set minutes, press 
/ 
to change minute. After the setting, press SET to save and reset second.
(2) Body fat meter mode
In Time Mode, press MODE once to enter into the body fat meter mode.
Select user:
By pressing the UP key, you may switch to USER0, 1,…,10.
USER 0: This is a Guest (unspecific user) and the data and measurement value are not memorized.
USER 1 to 10: The basic information will be memorized and the measurement value is memorized too (10 groups).
Setting user's basic information:
Select user (USER 0 to 10) and then press SET for 2 seconds to enter into setting mode for weight
(Fig1), height (Fig2), sex (Fig3) and age (Fig4) that go flashing. Use the 
/ 
key to change setting. After each setting, press SET to enter into the following, until successful setting (USER1 to10 will memorize all basic information as set).
8