Transmitting Data to a Continua Manager
Measurement results will be automatically transmitted to the paired Manager at each measurement. In the case of unsuccessful transmission, the device stores the last 25 measurements in memory. The device will send all of the data at the next successful connection and clear memory.
Before Requesting Service
|
| Problems | Corrective Action |
Nothing is displayed by pressing the | Check the battery installation. | ||
measurement switch. | Replace all four batteries with new ones. | ||
“88888” remains displayed. | Remove and reinstall the batteries. | ||
“e- 0” is displayed. | Place the scale on a solid level surface. | ||
The difference between an estimated | Remove any foreign objects that might | ||
weight and a measured weight is | be touching the bottom of the scale. | ||
excessive. | When the scale is placed on a carpet, be | ||
|
|
| sure that the |
|
|
| try moving the scale to a level surface |
|
|
| such as tile or wood. |
|
| is displayed. | Replace all four batteries with new ones. |
|
| ||
|
|
|
|
If you can not locate and fix the problem, contact your supplier, or the A&D service group. The A&D service group will support authorized suppliers with technical information, spare parts and units.
9