A&D UC-322 specifications Measuring Your Weight With no preset height

Page 8

Measuring Your Weight (With no preset height)

Up to 15 weight data can be saved in memory, each for user 1 and for user 2. Additional measurements are saved by deleting the oldest data in memory.

The procedure below is an example of how to measure the weight of user 1, of whose height has not been preset.

1 Press the ON/OFF 1 switch. 88888 appears flashing.

To measure the weight of user 2, press the ON/OFF 2 switch.

2 Wait until the OK symbol appears. Wait until the display 0.00 kg and the OK symbol appear. Step on the scale gently.

3 Stand still during measurement. When the OK symbol disappears, the measurement sequence has initiated. Stand still during the measurement.

4 Your weight is displayed after the

OK symbol appears.

5 Step off the scale.

For five seconds, the weight is displayed. At this time, the current measurement is saved.

After five seconds, the scale turns off automatically.

- 8 -

Image 8
Contents Compliance with European Directives PrecautionsIndications for Use Scale Components Top UndersideDisplay Symbols Battery capacity is lowBattery capacity is very low Replace the batteries with Use the scale as isMaintaining the Scale Installing or Replacing BatteriesSteps for Installing or Replacing Batteries Measuring Your Weight on a Carpet Steps for Installing the Add-on FeetBefore Measuring Your Weight Very obese AbovePresetting Your Height To 30.0.1 switch tothe ON/OFFMeasuring Your Weight With the preset height Measuring Your Weight With no preset height To measure the weight of user 2, press the ON/OFF 2 switchMeasuring Your Weight Guest mode Displaying Data Saved in Memory Deleting Data Saved in Memory How to Dispose of the Scale SpecificationsBefore Requesting Service
Related manuals
Manual 2 pages 26.12 Kb