Panasonic ER1511  Charging the clipper,  Using the clipper,  Cleaning the clipper

Page 2

Thank you for choosing a Panasonic Hair Clipper. Please read all instructions before use.

Important

Before use

This clipper is designed for professional use to trim hair and beards. Charge it for 8 hours before use for the first time in order to activate the builtin rechargeable batteries. It can be operated on either an AC adaptor or rechargeable batteries. Read all instructions carefully before use.

Charging the clipper

Do not use any power cord or AC adaptor other than this AC adaptor (RE941).

Avoid charging the batteries at temperatures below 5 °C or above 35 °C.

Avoid charging the batteries in direct sunlight or near a radiating heat source.

The charge status ( ) lamp may blink at an early stage when it is used for the first time or if it has not been used for 6 or more months even if it is fully charged. This is not a malfunction.

Even though the clipper may not be used for an extended period, charge every 6 months to preserve battery life.

The power cord cannot be replaced. If it is damaged, the AC adaptor should be discarded.

Using the clipper

This clipper has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use, or leave in a high temperature environment.

Warning - Keep the appliance dry.

The clipper may become warm during operation and/or charging. This is normal.

Check that the blades and the attachments are not damaged before use. Replace them if they are damaged.

Before each use, apply oil at the places marked with arrows. (See page 8.)

You should not allow permanent wave lotion, hair restorer or hair spray to come into contact with the main body or the blades.

Doing so may result in cracking, discoloring or corrosion.

You should not drop the clipper on the floor.

You should not knock the blades and the attachments against hard objects.

You should not trim the hair of a pet.

Cleaning the clipper

Clean the housing using only a cloth slightly dampened with water or a mild soap solution.

Never use a caustic solution.

Never submerge the clipper in water.

Storing the clipper

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and



Image 2
Contents Model No. ER1511  Charging the clipper  Using the clipper Cleaning the clipper  Storing the clipperSpecifications Parts identificationCharging the hair clipper Connecting the comb attachment shelf to the charging standCharge LOW blinks Out While using About the LED displayUsing the hair clipper CutRemoving and mounting the blade Blade maintenanceCare Brush off any Remove Hairs from Cleaning the bladeLubrication Clipper Off the hairs From around From the blade Blade EdgeRemoving the built‑in rechargeable batteries Important notice regarding environmental protectionHttp//panasonic.net