Removing the built‑in rechargeable batteries
1.Remove the blades 1 and four screws 2.
2.Remove the spring 3, the under cover 4, and the blade holder 5.
3.Remove the dial 6 and open the housing 7, and then take out two batteries 8.
•Disconnect the clipper from a household outlet.
•Discharge the batteries completely before removing them.
•Be careful not to
WARNING - Do not attempt to replace the batteries for the purpose of reusing the clipper. This could result in the risk of fire or electric shock.
Important notice regarding environmental protection
The built‑in rechargeable Nickel‑Metal Hydride batteries contain substances that may be environmentally harmful. Please remove the batteries before discarding your clipper.
For environmental protection and recycling materials This clipper contains Nickel‑Metal Hydride batteries.
Please make sure that the batteries are disposed of at an officially assigned location, if there is one in your country.