Sunbeam 7689 manual Memory Function, Memory Input, Memory Recall, Memory Erase

Page 9

Memory Function

Memory Input

Your Sunbeam Wrist Blood Pressure Monitor has a memory feature. When a valid measurement is made, the reading data (systolic, diastolic and pulse rate) will be stored in the memory auto- matically as soon as the unit is turned off, automatically shuts off, or when another measurement is initiated. The monitor has the capacity to store 14 readings, and also computes an average of all memory readings. When more than 14 readings are taken and recorded to memory, the oldest ones will be lost.

Memory Recall

To recall your last reading, press the MEMORY button. A “1” will appear in the lower right hand corner of the display which represents the newest memory reading. When the memory but- ton is pressed again, the display will show “2’: which represents the second newest reading, and so on. The memory will recall up to 14 pre- vious readings. When the letter “A” appears in the display, the average value of your systolic, diastolic and pulse rate based on the memory readings is shown.

Memory Erase

When the batteries are taken out of the monitor, all records of readings saved in memory will be erased. NOTE: When taking a measurement, the MEMORY button is inactive.

8

Image 9
Contents Automatic Wrist Blood Pressure Monitor What is High Blood Pressure? What is Blood Pressure?Helpful information Typical daily blood pressure fluctuationsPage Using a Wrist Unit Correct Method of Measurement How to Apply the Wrist Cuff Battery Installation/ReplacementDiagram B Preparation Before Taking a MeasurementTaking a Measurement Diagram C Diagram D Page Memory Input Memory FunctionMemory Recall Memory Erase~~~ 330 Indication Cuff pressure reaches 330 mmHg Troubleshooting Troubleshooting Problem Recommended ActionCare and Maintenance Cleanins and storaae Care and Maintenance Cleaning and storageIopdcifications Year limited Warranty Page HOME@ How to Obtain Warranty Service