4~ . Insert the air connector.into base unit if not already.attached.
5.Relax for a few more minutes after the cuff is applied before beginning ~the measurement.
1
i
Left Arm
~Taking Your Blood Pressure
1.Place the cuff on the arm that will be used for the measurement (preferably the left arm). See previous section on proper cuff placement.
‘2. Remaih seated or in a reclining position during measurement. Keep the arm
~with the cuff as still as possible and position the cuff at heart level. Movement during measurement could cause an error, requiring a second measurement.
3.Press the power button. When the.power’button is pressed, all of the display symbols will appear for one second. When the “0” is displayed, the monitor is ready for measurement. If the “A’ mark appears, the cuff has some air trapped in it. Rress the exhaust valve button until “0” appears.
Page 3