After using the appliance
•There is a risk of bacteria propagating, so wash thoroughly and dry before storing.
1Open the water supply cap and dispose of
the water in the tank.
2 Turn the switch to ON, and drain the water inside the appliance.
• Run the appliance for 2 to 3 seconds until no water comes out.
3 Turn the switch to OFF. |
| ||
4 Press the nozzle |
| ||
| release button, remove |
| |
| the nozzle and place it |
| |
| in the storage |
| |
5 | compartment. | 4 | |
Store the main unit. | |||
| |||
• Press it in until it clicks. | 4 | ||
| • Watch out not to clamp | ||
|
| ||
| your fingers in the upper |
| |
| part of the tank. |
| |
6 Close the water supply | 5 | ||
| cap. | ||
6