Plumbing Connections

All plumbing connections should be made by a qualified, licensed plumber in accordance with local plumbing and building codes.

Hot and Cold Water Supply Lines

Connect 1/2” ID supply tubes to a fresh water source. Shut-off valves should be utilized.

Electrical Connections

The Foot spa must be plugged into a GFCI protected outlet, installed by a licensed electrician.

Testing the Foot spa

Clean the tub and fill with water to the wave-mark (water level) on the wall of the tub.

When the tub is filled with water, turn the switch on the front of the pedicure spa to activate the whirlpool pump. Water should be coming out of the jets and the Air Bleed spout. Check for whirlpool leaks. After checking under the tub for leaks, use the same switch to turn the whirlpool pump off and drain the tub basin by opening the overflow/waste control handle and turning on the Power Drain Pump if installed.

Cleaning and Care of Your Foot spa

Between Each Customer

•Drain all water and remove debris from the pedicure spa.

•Clean the surfaces and walls of the Foot spa with soap or detergent and rinse with clean, clear water

•Disinfect with an EPA-registered disinfectant.

•Wipe out with a clean towel.

Flushing of the Whirlpool System

Caution: J&A USA requires that the pedicure spa be thoroughly cleaned after every 10th pedicure and after the last pedicure of the day. It is extremely important to flush the whirlpool system of the Foot spa to prevent harmful bacteria from growing and to prolong the life of your pedicure spa.

•Remove the Suction Fitting Cover with a phillips screwdriver

•Scrub the suction cover with a chlorine bleach solution of 1 (one) teaspoon of 5% chlorine bleach to 1 gallon of water, or

•Totally immerse the suction Fitting cover in an EPA-registered disinfectant and scrub.

•Replace the Suction Fitting Cover with a screwdriver. Do not over tighten the mounting screw.

•Do not run the pedicure spa whirlpool jets without the Suction Fitting Cover in place.

•Fill the tub basin near the wave mark on the rear wall with hot water.

•Turn the whirlpool jets on.

•Add 3 (three) teaspoons of low foaming “crystal” dishwasher detergent and 2 (two) ounces of household bleach to the tub basin.

•Run whirlpool for 10-15 minutes and drain the tub basin.

•Fill the tub basin near the wave mark on the rear wall with cold water.

•Run the whirlpool jets for 5 minutes and drain the tub basin.

•Clean the pedicure spa with a soft cloth and a mild detergent.

Weekly Disinfecting Procedure of the Whirlpool System

•After following the outlined procedures for daily cleaning, fill the pedicure spa tub with hot water and 4 (four) teaspoons of 5% bleach solution.

•Circulate the solution through the whirlpool system for 5-10 minutes.

•Let the solution sit overnight (at least 6-10 hours).

•The following morning (before the first customer) run the foot spa for 5 minutes and drain.

•Follow the procedure “Flushing of the Whirlpool System”.

Petra Collection specifications

The Whirlpool Petra Collection represents a significant advancement in modern kitchen design, combining aesthetics with innovative technology to enhance the cooking experience. Designed to meet the needs of culinary enthusiasts and everyday home cooks alike, the Petra Collection emphasizes versatility, efficiency, and style.

One of the standout features of the Whirlpool Petra Collection is its intuitive Smart Sensor Technology. This innovation ensures precision cooking by automatically adjusting cooking times and temperatures according to the dish being prepared. This means users can achieve flawless results every time, whether they’re baking, roasting, or steaming.

Energy efficiency is a hallmark of the Petra Collection. Each appliance is designed to consume less energy without compromising performance. With Energy Star ratings, these appliances not only help reduce utility bills but also contribute to a more sustainable kitchen environment. The advanced insulation techniques employed in ovens and dishwashers further minimize energy loss, making them eco-friendly options for the modern home.

Another notable characteristic of the Petra Collection is its sleek and contemporary design. Appliances feature a seamless outer finish that complements any kitchen decor, enhancing the overall aesthetic. The smooth, easy-to-clean surfaces allow for convenience and maintenance, ensuring that the appliances remain looking pristine even with regular use.

The Petra Collection also focuses on user-friendly functionality. Each appliance is equipped with digital controls and easy-to-read displays, allowing for streamlined operation. Many models feature preset cooking modes that cater to popular dishes, providing a guided cooking experience that removes the complexity often associated with culinary tasks.

Furthermore, Whirlpool’s commitment to innovation is evident in its use of advanced cooking technologies. The collection includes options like steam cooking and convection heating, which promote healthier cooking methods, preserve nutrients, and deliver even cooking results. The multi-functionality of these appliances allows users to explore various cooking techniques, making it easier to experiment with new recipes.

In summary, the Whirlpool Petra Collection combines thoughtful design with cutting-edge technology. Its Smart Sensor Technology, energy-efficient performance, user-friendly interfaces, and stylish aesthetics create an environment where cooking becomes a delightful experience. The collection is ideal for anyone looking to elevate their culinary journey while enjoying the benefits of modern kitchen innovation.