NOT DX1700
Steam Ironing
WARNING !
•Never iron or steam clothes while they are being worn.
•Before ironing for the first time fill iron and allow to heat.
•The iron should be allowed to emit steam for 1 to 2 minutes while pressing the burst of steam button a few times to remove any impurities. This should also be done if iron is not used regularly.
Steam is only produced when the temperature dial is set to the shaded area (after •• setting).
Burst of steam
-This feature is ideal for removing stubborn wrinkles or pressing in sharp creases.
When the temperature control is set to the steam zone (after ••) the burst of steam can be used by pressing the burst of steam button. Leave an interval of 4 seconds between bursts.
Vertical Steam
- The iron can also be used vertically.
-This is especially useful for getting wrinkles out of hanging clothes, curtains, tapestries, etc.
-To steam vertically, press the burst of steam button while holding iron in the upright position.
Warning! Never iron clothes while they are being worn.
Dry Ironing
-To iron without steam, slide the variable steam control lever to the 
position.
-We recommend dry ironing with an empty tank.
-Set the temperature for the type of material to be ironed (•, •• or •••).
Steam ironing*
- You can steam iron by setting the tempe- rature in the marked steam zone (after ••). The steam quantity can be set to between 
(no steam position) and 
(maximum steam quantity). We recommend setting to maximum steam quantity only when the iron is set at temperature setting (•••).
Auto Steam*
-For steam output to be automatically adjusted to the soleplate temperature, turn the steam control to the 
position.
AUTO
*Depending on model