UK
SAFETY INSTRUCTIONS:
•Read all instructions before using.
•Plug in your appliance using the proper voltage as indicated on your unit.
•Always unplug the appliance immediately after use.
•Do not use while bathing.
•Keep away from water or humid areas (such as sink filled with water).
•Do not place in or drop into water or other liquid.
•If the appliance falls into water, unplug it immediately. Do not reach into the water.
•Do not leave the appliance unattended while it is operating or plugged in.
•Close supervision is necessary when this appliance is used by or near children.
•Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
•Never operate this appliance when it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged in any manner or dropped into water. Take appliance to the store, where you bought it for examination and repair or mechanical adjustment.
•Keep the cord away from hot or heated surfaces. Do not wrap the cord around the appliance.
•Do not use outdoors.
•Do not place appliance on any surface while it is operating or while switch is turned on.
•Do not use an extension cord with this appliance.
This appliance adopts the most advanced technology and uses PTC (Positive Temperature Coefficient) as calorific element. This gives a stabile temperature without influence of the outer condi- tions. The ceramic coating provides a better distribution of heat, creating a smoother, flawless finish to he hair and longer lasting results. The ceramic surface locks in the hair’s natural oils which retains colour for longer and reduces static
USE
The hair should be clean and dry.
Place the curling tongs on an even, heatresistant surface and connect the power supply on the on/off button. The indicator lamp is activated and flashes on and off until the selected tempe- rature has been reached.
The heat can be adjusted in an interval between 80 and 160 de- grees Celsius by using the control knob by the on/off button. This is indicated by figures from 1 to 25, where one is the lowest possible heat and 25 is max. heat, 160 degrees C.
It takes about 5 minutes before the plates have reached the selected temperature.
2