Panasonic EW3111 operating instructions Example, When, for example, 21 readings have been

Storing blood pressure readings

Calling up readings from memory

This monitor has enough memory capacity to store 21 readings for two users.

M / R

1

Readings may be recalled once they have been stored in the memory without having to pressing the ON/OFF/Start Button.

M1 and M2 will flash on the display after a measurement.

1. Press the Memory/Recall

Button number if you want

your readings to be recorded.

140

130

90

85

P/min.

140

130

1.Push the Memory/Recall Button number of the user whose data you want to call up, M1 for example. ‹Averaged values for all recorded measurements are displayed›

•M1 A is displayed at the bottom of the screen.

Example:

Person A is recorded under M1

Person B is recorded under M2

M / R M1 M2 M / R

90

85	• When, for example, 21 readings have been
P/min.	recorded, the average values of 21 readings will

2. Memorization completed

1 2

M1

be displayed. (When there are no readings or only one reading in memory, M1 A is not displayed.)

Twenty-one readings can be
recorded for each person. If you
exceed the number of readings,
the existing readings will be
deleted in order of the oldest
as new readings are made.
• Measurements for	which
accurate readings could not be
obtained (display of	error
symbol E for blood pressure
values) cannot be stored in the
memory.

140

130

90

85

P/min.

M1

Number of readings in memory

• The blood pressure indicator LED will flash (approx. 6 seconds)

M / R 2. Press the Memory/Recall Button again.

1‹Each time the Memory/Recall Button is pressed

readings are displayed in order of the most recent entry›

• The blood pressure indicator LED will flash (approx. 6 seconds).

• Nothing will be displayed when there are no readings in the memory.

140	Please use a quick, light touch when pressing
130

NOTE: Blood pressure readings can be memorized when the error symbol E is displayed only for the pulse rate.

When you want to clear all memory

1.To call up the data that you wish to delete, simply push the Memory/Recall Button number of that user.

2.Push the same user’s Memory/Recall Button again, for more than about 3 seconds, until the memorized readings are deleted

NOTE: Individual readings in the memory cannot be deleted selectively.

13

		the Memory/Recall Button. Take care to do
90		so, as continuous pressing of the button for
85
P/min.		a duration of two seconds or more will clear
M1		all readings from the memory.
On/Off	3. Press the ON/OFF/Start Button to turn off the
		unit.
Start	• If you should forget to turn off the unit after

calling up the memory without pressing the ON/OFF/Start Button, the unit will switch off

automatically after approx. 30 seconds.

14