Using your Straightener

Using your straightener

•Insert the plug into the power outlet and turn the power on.

•Move the on/off switch to the on position

(I)

•Select the desired heat level by rotating the temperature dial on the side of the straightener. Use lower heat for fine hair or touch ups. Use higher heat for thicker hair or more resistant curls.

•Allow the straightener to heat up for a few moments before using.

•Brush hair thoroughly. Separate out section of hair approximately 4cm in width and smooth it with a comb.

•For best results start at the scalp and work to the ends of the hair. Place the separated section of hair between the flat plates and close the handle around the hair.

•Hold the styler in position for 3 to 5 seconds depending on the hair type.

•Once the hair is heated, carefully slide the styler along the section of separated hair, making sure that the hair is heated and straightened all the way to the ends.

•Select another section of hair and repeat the process.

•Use the cool shot setting on the hairdryer to set the style.