•...the 4th red LED, medium heat level, for robust hair.
•...the 3rd red LED, lower heat level, for normal hair.
•...the 2nd red LED, very low heat level, for fine hair.
•One red LED blinks, minimal heat level, for very fine hair.
5.When the running light progresses to the selected heat level, double press the On/Off 5 button. The green LED glows. The buttons are now lok- ked, the temperature cannot be changed by an unintentional pressing of the buttons
“+” 4 or “-” 4.
Note:
When you want to release the temperature lock, once again double press on the On/Off 5 button. The green LED goes out, the button lock is released.
6.Wait until the running light in the LED Indicator 3 glows permanently up to the programmed temperature. The desired temperature has now been reached.
Straightening hair
•Prepare the hair as described in "Before straightening/ Before curling"..
•Start with the lower hair sections at the back of the head. Work over the sides to the front.
1.Separate a ca. 2 cm wide hair strand.
2.Clamp the hair strands between the hotplates 2 and close to the skin, then press them together.
3.Pull the whole of the hair strand through the hotplates 2, in that you pull the hair straightener downwards.
4.Repeat the process with each individual strand.
5.When you have smoothed all of the strands, double press the On/Off 5 button to release the temperature lock. The green LED goes out.
6.Press the On/Off 5 button until the LED Indica- tor 3 goes out.
7.Remove the plug from the wall power socket.
8.Press the hotplates 2 together and slide the
locking device 7 to the position 
.
Curling hair
•Prepare the hair as described in "Before straightening/ Before curling".
•Start with the lower hair sections at the back of the head. Work over the sides to the front.
1.Separate a ca. 2 - 3 cm wide hair strand.
Attention!
Ensure that the hotplates 2 do not make contact with the skin of the head. Risk of Burns! Only the tips 1 are cool.
2.Clamp the end of hair strand between the hot- plates 2 and press them together.
3.Turn the combi hair styler to wrap the hair strand around the hotplate.
4.Dependant on hair type and adjustment, wait a few seconds.
Attention!
Ensure that the hotplates 2 do not make contact with the skin of the head. Risk of Burns! Only the tips 1 are cool.
Attention!
Dependant on the hair type and the heat level, it can take a differing length of time until a curl is shaped. Try out various adjustments.
To avoid damaging your hair, ALWAYS start with a lower heat level and a short waiting time in the hair. Gradually raise these levels until you discover the optimal adjustment for you.
- 4 -