Switching on/off /
Selecting a heat level
When you have attached the required accessory and inserted the plug into the power socket, you can switch the appliance on with the step switch e and select the output level:
„0“ | The appliance is switched off |
„C“ | for a cold |
„1“ | for a reduced |
„2“ | for a high |
You switch the appliance off by sliding the step switch e to the position "0" (= appliance off).
Using the attachments
Warm-air round brush
The
1.Attach the
2.Slide the step switch e onto the desired setting.
3.Take hair strands with a maximum width of 5 cm (ca. 2 in) and wrap them from the ends to the roots around the
4.When the strands of hair are dry, press the release button w and guide the
5.Comb the hair through when it has cooled down.
Brush attachment
The brush attachment o is suitable for styling
1.Attach the brush attachment o onto the appliance as described in the chapter “Attaching/detaching accessories”.
2.Slide the step switch e onto the desired setting.
3.Style the
4.Comb the hair through when it has cooled down.
Volume attachment
The volume attachment i helps to bring fullness into the hair. You can use the volume attachment i either directly at the hair roots or at any position along the length of the hair.
1.Take ca. 5 cm (ca. 2 in) wide strands and slide them between the fingers of the volume attach- ment i.
2.Turn the volume attachment i to obtain the des- ired shape and fullness.
3.Allow the warm air to take effect for a few seconds.
4.Pull the volume attachment i from the hair without pressing the unlocking device w button.
Cleaning and care
Never open the housing of the appliance. There are no operating elements inside. An open housing will create the risk of a potentially
Before cleaning the device, ....
•always disconnect the power plug from the power socket
•and let it cool down completely.
- 16 -