Panel Description
Front Panel
1
2
4
3
1.Firmware Update Port: Use Mini USB to USB cable to connect to a Windows computer to update.
2.HDMI IN Port: Connect HDMI or DVI (with adapter) source here.
3.Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there is an issue with the cable or signal, then it will blink.
4.Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking power is intermittent or there is a problem with the cable. If LED is off, no power is passing to the receiver (check your outlet or the power cable).
Back Panel
1
2
1.Power Port: Connect included captive screw connector and power adapter here.
2.CAT5e/6/7 OUT Port: Connect CAT5e/6/7 cable from here to a compatible receiver. Ex.
atlona.com | 4 | Toll free: |
Local: | ||
|
|