Silvercrest SRHT 1500 A2 Safety instructions, Reduce the risk of electric shock

Page 4

TRAVEL HAIRDRYER

Safety instructions

Reduce the risk of electric shock

ALWAYS set the voltage selector on the hairdryer to the rating of the local power supply. UNDER NO CIRCUMSTANCES should you operate the appliance on a 230-240 V mains supply when the voltage selector switch is set at 120 V (or vice-versa). It would destroy the appliance and the guarantee would be void. Adjust the voltage selector e with a coin. Make enquiries about the rating of the local electrical mains supply with the energy supplier or with the hotel personnel. First when this has been done insert the plug into a power socket and then switch your travel hair dryer on.

Connect the travel hair dryer only to correctly installed mains power sockets with a current rating of 120/230 -240 V at 60/50 Hz.

Under no circumstances may the appliance be submersed in fluids or fluids be allowed to permeate the housing.

Do not expose the appliance to humidity and do not use it outdoors. Should liquids enter the housing, unplug the appliance from the power socket immediately and have it repaired by a qualified technician.

- 2 -

Image 4
Contents Travel Hairdryer Srht 1500 A2 Srht 1500 A2 Index Safety instructions Reduce the risk of electric shockAsk your electrician for advice Risk of burns and physical injuries Intended Use Items suppliedOperating Elements Ion functionOperation Drying and styling hair Risk of electrical shock CleaningFire hazard Technical data TroubleshootingDisposal Warranty and Service Importer