Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when the programme comes to an end. If you do not want to hear the audio warning, press “Cancel Audio Warning” button. The relevant light
will turn on when this button is pressed and an audio warning will not be given when the programme comes to an end.
C You can select this function either before or after the programme starts.
Warning indicators
C Warning indicators may differ according to
the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter cleaning after the programme finishes.
C If the filter cleaning warning light lights up continuously, please refer to, “Suggested
solutions for problems”.
Water tank
Warning light starts flashing when the tank is filled with water. The dryer stops operating if the warning light turns on when a programme is running. Drain the water in the water tank to restart the dryer. Press “Start/Pause/Cancel” button to start the programme after you have emptied the water tank. The warning light turns off and the programme resumes operating.
Starting the programme
1.Press “Start/Pause/Cancel” button to start the programme.
2.Light of the “Start/Pause/Cancel” button will turn on to indicate that the programme has started.
Progress of programme
Progress of a running programme is shown through the programme
“Drying”:
-Drying level will be illuminated during the whole drying process until the drying degree reaches
“iron dry”.
“Iron Dry”:
-Starts to illuminate when the drying degree reaches “iron dry” step and remains illuminated until the next step.
“Cupboard dry”:
Starts to illuminate when the drying degree reaches “Ready to wear” step and remains illuminated until the next step.
“Final / Anti-creasing”:
-Illuminates when the programme comes to an end and
C If more than one LED light up or flash concurrently, it means there is malfunctioning or a failure (please see, Solution suggestions for problems).
Changing the programme after it has started
You can use this feature to dry your clothes under higher or lower temperatures after your dryer has started.
For example;
1.Press and hold the “Start/Pause/Cancel” button for about 3 seconds to “Cancel” the programme in order to select “Extra Dry” programme instead of “Iron Dry” programme.
2.Select the “Extra Dry” programme by rotating the programme selection button.
3.Press “Start/Pause/Cancel” button to start
the programme.
C Press “Start/Pause/Cancel” button for 3 seconds to cancel the programme or turn the programme selection knob in any direction to end the programme while the machine is running. Water tank and filter cleaning warning lights turn on to warn the user when the programme is cancelled by pressing the “Start/Pause/Cancel” button for 3 seconds. However, the warning lights do not turn on when the programme is cancelled by turning the programme selection knob. Only the drying light turns on and the machine remains in hold until a new programme is selected and the “Start/Pause/Cancel” button is pressed.
17
EN