Hotpoint NWSR473, NWXR473 operating instructions Reversing the Door

Page 11

Reversing the Door

Tools Needed:

Standard # 2 Phillips screwdriver

Tape-tipped putty knife

Needle-nosed pliers

1Open the door and remove the filler plugs opposite the hinges.

2With the door completely open, remove the bottom screw from each hinge on the dryer face.

3Insert these screws about half way into the TOP holes, for each hinge, on the opposite side. (Where you removed the filler plugs.) Apply firm pressure to get the screw started in untapped holes.

4Loosen the top screw from each hinge on the dryer face half way.

5With one hand holding the top of the door and the other hand holding the bottom, remove the door from the dryer by lifting it UP and OUT.

6Rotate the door 180°. Insert it on the opposite side of the open- ing by moving the door IN and DOWN until the top hinge and the bottom hinge are resting on the top screws inserted in step 3.

7Remove the remaining screws from the side of the opening from which the door was removed. With these screws secure each hinge at the bottom.

8Tighten the two top screws of each hinge.

9Reinsert the plastic plugs on the side from which the door was removed.

11

Image 11
Contents Dryer Welcome 800.626.2000If YOU Smell GAS Read all safety information before usingSafety Precautions Page Not Operate the Dryer Page Controls on your dryer Selecting Drying Cycle Drum Lamp Other dryer features your model hasSignal Press GuardReversing the Door Suggested Care Specialty Care GuideLoading Hints LoadingSorting Lint Filter Care & CleaningInterior ExteriorExhaust Hood Exhaust DuctLint on Clothes Before you call for serviceDryer Doesn’t Heat Greasy Spots on ClothesClothes Take Too Long to Dry Static OccursClothes are Wrinkled Clothes ShrinkCorrect Venting Incorrect Venting Venting the DryerPage Page GE Answer Center We’ll be thereFurther Service Service ContractsDryer Warranty
Related manuals
Manual 23 pages 20.69 Kb