Hotpoint NWSR473, NWXR473 operating instructions Exhaust Duct, Exhaust Hood

Page 15

Exhaust Duct

Inspect and clean the dryer exhaust ducting at least once a year to prevent clogging. A partially clogged exhaust can lengthen the drying time.

To clean the exhaust duct follow these steps:

1Turn off electrical supply by disconnecting the plug from the wall socket.

2Disconnect exhaust duct from the dryer.

3Vacuum the exhaust duct with the hose attachment.

4Reconnect the exhaust duct to the dryer.

Exhaust Hood

Make sure the inside flaps of the exhaust hood move freely (you may want to check with a mirror).

Make sure inside flaps are fully open when dryer is operating.

Make sure there is not wildlife (birds, insects, etc.) nesting inside the exhaust duct or hood.

Check the inside of the exhaust hood with a mirror to rid of debris

15

Image 15
Contents Dryer Welcome 800.626.2000If YOU Smell GAS Read all safety information before usingSafety Precautions Page Not Operate the Dryer Page Controls on your dryer Selecting Drying Cycle Drum Lamp Other dryer features your model hasSignal Press GuardReversing the Door Suggested Care Specialty Care GuideLoading SortingLoading Hints Lint Filter Care & CleaningInterior ExteriorExhaust Hood Exhaust DuctLint on Clothes Before you call for serviceDryer Doesn’t Heat Greasy Spots on ClothesClothes Take Too Long to Dry Static OccursClothes are Wrinkled Clothes ShrinkCorrect Venting Incorrect Venting Venting the DryerPage Page GE Answer Center We’ll be thereFurther Service Service ContractsDryer Warranty
Related manuals
Manual 23 pages 20.69 Kb