HAIR DRYER HD 6580________________________________________
Operation
Check if the mains voltage on the type plate (on the handle of the device) corresponds to your local mains supply.
1Thoroughly towel dry your hair after washing.
2Attach the concentrator nozzle E if required.
3Plug the power cord A into the wall socket.
4Turn on the appliance with the switch C and set the required blower level.
5Set the temperature level with the switch B .
6If necessary, interrupt heating by pressing and holding down the D button (Cool Shot).
Note
7Cool Shot interrupts heating and provides a cool air flow. This allows you to fix your hair- style better and more lastingly.
7 After use, switch off the appliance with the C switch and pull the plug of the mains
cable A out of the socket.
Note
7Never wind the mains cable around the appliance, because this can cause damage. Please check the appliance and the cable regu- larly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing. Remember to clean the air inlet grille F occa- sionally with a soft brush to remove hairs and dust.
Take off the air inlet grille F and clean the filter at regular intervals. To do this, pull the grille back.
Environmental note
This product has been made from
Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging.
Please find out about collection points operated by your local authority.
Help protect the environment by recycling used products.
Technical data
This product fulfils the European directives 89/336/EEC and 73/23/EEC.
Power supply
Power
2000 W
Technical and design modifications reserved.
10ENGLISH