Stopping the Engine
Note: If you have an
1.Move the throttle lever back to the STOP position.
2.The key has a pressure lock that prevents it from vibrating loose during operation. If you wish to remove the key, push it in and then quickly and firmly pull it out. If the key becomes difficult to remove, spray FLUID FILM® or a similar lubricant into the keyhole.
Engaging the Trimmer Head
1.Bring the bail bar toward you and grip it together with the handlebar. (See trimmer picture on page 8.) Keep holding the bail bar to the handlebar. The cutting cords will rotate and will continue to rotate until you release the bail bar.
Stopping the Cords from Spinning
1.Release the bail bar from the handlebar. The trimmer head will stop spinning while the engine continues to run.
14 | DR® TRIMMER/MOWER™ Safety & Operating Instructions |