Andis Company Andis AGR+ AGRC manual Operating Instructions, USE of the Refresh Feature

Page 7

8.Disconnect the charger from the AC outlet if long periods of non-use are anticipated.

9.Never store batteries in a discharged condition. Recharge them immediately after they are discharged.

10.Many factors influence the life of the battery pack. A battery pack that has received heavy use and is over a year old, may not give the same run-time performance as a new battery pack.

USE OF THE REFRESH FEATURE

The Refresh feature works overnight by first discharging the battery pack, and then quickly charging it. A trickle charge maintains the battery at 100% for use the next day. This allows a battery pack that has developed a “memory” to perform like new.

A battery pack that receives monthly Refresh cycles will last much longer than one that does

not. Andis suggests that the Refresh feature be used once per month at the end of a business day. Using the Refresh feature overnight will ensure that your work will not be interrupted while “Refresh” operates (Diagram I).

1.The charger base needs to be plugged in for the Refresh feature to work.

2.With the AGR+ clipper or AGR+ battery pack in the charger base, press the Refresh button once. The green light will blink while the battery is discharging.

3.The green light will stop blinking, and remain continuous when the battery pack is charging once again (see Sensacharge light sequences, page 3).

4.If the Refresh button has been accidentally pressed, there are two

ways to stop the battery pack from being discharged. Removing the clipper from the charger, then returning it, will cancel the Refresh operation and resume fast charge. You may also unplug the charger base for several seconds to reset the charger.

Diagram I

5.NOTE: The refresh cycle takes approximately eight hours to produce a fully charged battery pack. The charge must make accurate battery voltage measurements during this time. If the charger does not exit the refresh cycle or does not produce a fully charged battery, follow the steps on page 6, number 2.

OPERATING INSTRUCTIONS

Please read the following instructions before using your new Andis Clipper. Give it the care that a fine precision built instrument deserves and it will give you years of service.

REMOVING BLADE SET

To remove blade set, first make sure your clipper motor is switched “OFF”. Push blade release mechanism under blade hinge (Diagram J). While holding down the blade release mechanism, push down on blade, then gently pull the blade forward (Diagram K), and slide it off the blade hinge.

If your blade hinge should snap closed and is flush with the clipper, use a small standard screwdriv- er to pry the tongue of the hinge out (Diagram L).

NOTE: Hair may accumulate in the front cavity of the housing under the blade. If this happens, you can clean out the hair by brushing out the cavity with a small brush or an old toothbrush while the blade is off the clipper (See Diagram M for location of cavity being referenced).

REPLACING OR CHANGING BLADE SET

 

 

To replace or change your blade set, slide the blade bracket onto the

 

 

hinge of the clipper (Diagram N) and with the clipper turned “ON”,

 

 

push the blade towards the clipper to lock into position.

Diagram J

6

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model Agrc Model AGR+ Important Safeguards This Product is Intended for Commercial USE Model Agrc Cord Pack UseRead the Following Before Charging this Clipper Model AGR+ With Battery UseSafety Rules for Charger and Battery Pack Guidelines for Battery Pack and Charger USE Replacing or Changing Blade SET USE of the Refresh FeatureOperating Instructions Removing Blade SETUser Maintenance Factory Repair Service Changing the Blade Drive AssemblyDo not Overtighten Medidas Preventivas Importantes Este Producto HA Sido Diseñado Para USO Comercial Guarde Estas InstruccionesReglas DE Seguridad Para EL Cargador Y EL Paquete DE Batería Cargador funcionan como diversos sistemas eléctricos que USO DE LA Función DE Renovación Reemplazo O Cambio DEL Juego DE Cuchillas Retiro DEL Juego DE CuchillasMantenimiento POR Parte DEL Usuario Maquinillas para cortar el pelo, mientras la maquinilla esté Servicio DE Reparación EN Fábrica Précautions ImportantesAppareil À Usage Commercial Conserver Cette NoticeModèle AGR+ À Pile Règles DE Sécurité Relatives AU Chargeur ET AU BLOC-PILE Directives Dutilisation DU BLOC-PILE ET DU ChargeurPage Utilisation DU Dispositif DE Rafraîchissement Mode DemploiDépose DU JEU DE Lames Entretien DE Lappareil Remplacement OU Changement DU JEU DE LamesSoin ET Entretien DES Lames DE LA Tondeuse Andis Service DE Réparation Assuré PAR Lusine Remplacement DE Lentraînement DE LA LameLimited Warranty Form #63966 Rev. a Andis company, USA

Andis AGR+ AGRC specifications

Andis Company, a leader in the professional grooming industry, is renowned for its commitment to excellence and innovation. Among its flagship products, the Andis AGR+ and AGRC stand out, setting new benchmarks in grooming technology. These cordless clippers are trusted by professionals and enthusiasts alike for their performance and versatility.

The Andis AGR+ clipper exemplifies reliability and power. It operates on a Lithium-Ion battery, providing over two hours of run time on a single charge. This feature is crucial for busy grooming sessions, ensuring that professionals have uninterrupted power. Additionally, the clipper offers a quick charge option, allowing for a rapid power boost when time is of the essence. Weighing in at a lightweight design, the AGR+ is comfortable for extended use, minimizing user fatigue.

One of the standout characteristics of the AGR+ is its powerful motor, designed to deliver exceptional cutting speed and efficiency. This clipper is capable of cutting through all coat types, whether it's thick, coarse, or fine hair, making it a versatile tool in any grooming kit. The adjustable blade system allows for easy blade changes and adaptability to different grooming needs, enhancing its functionality.

Similarly, the Andis AGRC model offers comparable performance but includes a few additional features aimed at enhancing the user experience. The AGRC comes equipped with a rechargeable battery that also provides two hours of runtime but supports a 'smart' battery indicator to inform users of the battery status. This is a particularly useful feature for busy groomers who need to manage their time effectively.

Both models boast a ceramic blade option, which remains cooler during use compared to traditional steel blades. This feature not only provides comfort for the animal being groomed but also extends the blade’s lifespan, as ceramic is less prone to dulling. The ergonomically designed grip of both clippers ensures comfort and control, allowing groomers to maneuver easily during sessions.

Andis Company’s commitment to quality is evident in the construction and durability of the AGR+ and AGRC models. Built to withstand the rigors of daily use, these clippers are a favorite among professionals. With their combination of powerful performance, long battery life, user-friendly features, and durable design, Andis AGR+ and AGRC are essential tools for anyone serious about grooming. Whether for pets or livestock, these clippers represent the pinnacle of grooming innovation.
Top Page Image Contents