OPERATION ________________________________________
ShavingTrimming
1Take off the plastic cap.
Note
7The foils and blade units may not be damaged. Replace any dam- aged parts before shaving.
2Switch on the appliance by pressing the lock button and pushing the switch A to the »ON« position.
3Pull your skin tight with your free hand and move the appliance slowly and gently against the direction of growth. Hold the appliance at a 90° angle to your skin. Make sure both foils touch the skin.
4Do not press too hard as you may damage the foils.
5After use, switch off the appliance with the switch A and put the plastic cap back on.
The trimmer cuts long hair on your face and neck, as well as your beard, moustache or sideburns.
1Switch on the appliance by pressing the lock button and pushing the switch A to the »ON« position.
2Push up the trimmer H (on the back of the appliance) until it latches in.
3After use, push the trimmer back down.
Note
7To preserve the batteries, always return the trimmer to the off posi- tion when it is not in use.