You have chosen this clipper to make short haircuts or general trimming easy.
Its carefully monitored production process and precise adjustments for the length GB of the cut make it a quality professional tool.
Read the instructions before using the appliance and avoid any danger caused by improper usage.
1 - DESCRIPTION OF THE CLIPPER AND ITS ACCESSORIES
Mod. HC 190 / HC 200:
A.Cutting wheel with precise adjustment system for the length of the cut.
B.Start/Stop button.
C.Side buttons for locking/unlocking the combs and the blade protector.
D.Combs
E.Cleaning brush.
F.Hairdressing comb.
G.Pair of scissors.
H.Blade protector.
I.Cutting head.
J.Adapter - 2.4V for mains supply model & 3V for rechargeable model. + book of instructions.
Rechargeable model only: (HC 200)
K.Battery charge light.
L.Batteries.
M. Battery
N.Storage case.
2 - FIRST TIME USE
Voltage:
•Mains supply model: with adapter and input voltage of 230 V 50 Hz, output voltage of 2.4 DC
•Rechargeable model: with voltage adapter: input 230 V 50 Hz, output voltage 3 V DC
•Your appliance is only designed to function at 230V.50Hz.
•Check that this voltage corresponds with that of your place of usage.
If you have chosen a rechargeable appliance, you can use it with the mains supply or in autonomous mode (cordless)
A - In mains supply mode: (models HC 190 / HC 200)
•Turn off the appliance: Start/Stop button in position O (Fig. 2)
•Plug the connector into the appliance (Fig. 3) and the adapter into the mains supply (Fig. 4)
•Start the appliance (Fig. 5)
There is no recharging during usage
B - In autonomous mode: (model HC 200 only)
•The appliance functions with 2 batteries
•Capacity: 1.2V / 600mA. (Per unit)
•Type: Ni
IMPORTANT ADVICE:
To optimise the
•Before
3 times you use it, it is important to allow the battery to run down completely.
A recharge time of 8 hours is recommended. When the battery recharge light is red, your appliance is charged
•Having unplugged the transformer, autonomy is approximately 50 minutes.