Sharper Image CA900 manual Press firmly until the can locks into place

Page 10

Steps for Successful Hot Gel & Hot Lather Shaving

4.Turn the dispenser over and depress the LOCKING TAB.

5.Carefully align the gel or lather valve with the center seal of the dispenser.

6.Gently insert the can valve into the seal and release the LOCKING TAB. (See Figure 3.)

Locking Tab	Center Seal

Figure 3

7. Press firmly until the can locks into place.

Note: If the can valve is not properly inserted into the center seal, gel will leak out of the unit.

10

Image 10

Contents Hot Gel+Lather Shaving System Table of Contents Important Safety Instructions Important Safety Instructions Use only on a level surface Variable Temperature Control General InstructionsParts Diagram Steps for Successful Hot Gel & Hot Lather Shaving Important NotesSteps for Successful Hot Gel & Hot Lather Shaving Press firmly until the can locks into place Control Cap Adjustment Switch Using Lather Using GelAfter a few minutes, the red indicator illuminates Removing the Shaving CanTroubleshooting Guide Keep Away from Water Warranty What Is Covered