Removing the headguard, Shaver Operation

Troubleshooting:

■ Your MS2-300 /400 cord/cordless shaver should not be used strictly as a cord-operated shaver, as continued cord only use will result in reduction of battery life.

■ In order to preserve the life of the batteries, they should be fully discharged every six months and then fully charged for 24 hours.

Dual Voltage

You can take your MS2-90/100/200/300/400 shaver with you when you travel just about anywhere in the world. Your MicroScreen® 2 TCT® shaver features worldwide automatic voltage conversion. Model MS2-200:105-240 volts AC, 50 Hz/105-130 volts AC 60, Hz Models MS2-90,100,300,400:100-240 volts, 50/60 Hz

Just plug it in to the local outlet (you may need an adapter plug) and use as usual. Your shaver will convert automatically to the local current requirements.

Battery Removal:

When your rechargeable shaver reaches the end of its useful life, the batteries must be removed from the shaver and be recycled or disposed of properly in accordance with your state and local requirements.

THE FOLLOWING PROCEDURE SHOULD BE FOLLOWED FOR BATTERY REMOVAL:

■ To avoid a possible electric shock hazard, unplug cord (if used) from electric outlet and shaver.

■ Remove head assembly by first pressing the two side buttons.( fig.1 )

■ Un-clip the top metal bracket by prying the lower back edge over the snap. Lift the lip of the rubber boot off the housing. ( fig. 2 )

■ Pry off the front panel.( fig.3 )Fig. 1 ■ Remove the two screws securing the cord

opening.( fig.4 )

■ Squeeze the front housing and pull the back off to expose the PCB and batteries.( fig.5 )

■ Pry the PCB assembly out of the shaver housing.( fig.6 )

Fig. 2

Removing the headguard

Before operating your MicroScreen ®2 TCT® Shaver, remove the headguard, which protects the screen and cutter assembly. It is important to remove the headguard correctly to avoid damaging the clips that hold it firmly to the shaver.

■Press lightly on the top of the headguard.

■Lift the lower rear edge.

■Pull the headguard away from the shaver.

Shaver Operation

Your shaver has a Slide Power Button that has different operating characteristics depending on which model shaver you have.

Models MS2-90/100

Lower position: Off; slide to upper position:On Models MS2-200,300,400

Have a switch lock button to prevent accidental operation. Lower position: locked Off, Press button,slide to Upper position:On

Charging

Prior to using your shaver for the first time, put it on charge for 24 hours.

To charge your shaver:

■Slide the power button downward to the "Off " position.

■Connect the AC power cord to the shaver and then to the electric outlet. A charging indicator light will come on,as described below.

■Your shaver cannot be overcharged, so you can leave it plugged in and charging between shaves.

■Use only the AC line cord supplied with the shaver.

■The MS2-200 is designed for cordless operation only. Plugging in the cord will not power the shaver.

■The MS2-300/400 on the other hand, comes with a special fea- ture that allows you to shave while your shaver is plugged in for recharging. Just follow the steps above to connect the AC power cord. Turn on the shaver by sliding the power button upwards. Your shaver will not be recharging while you are shaving, so after shav- ing, turn off the shaver by sliding the power button downward, and leave it plugged in so it can be recharged.

■The MS2-300/400 will provide a week's worth of shaving after

a one hour charge or a single shave after five minutes of charging.

Model MS2-400 The green indicator lights show that the shaver is charging.The lights will start to flash as the battery charge rate slows. A fully charged shaver will only flash intermittently. This shaver features a lighted fuel gauge that displays the amount of

Trimmer Operation

®®

Your MicroScreen 2 TCT shaver is equipped with a 3-position trimmer.

Position 1: Retracted out of the way

and "Off".

Trimmer

Power Button

Button

charge remaining. When only 20% of the charge remains, the red "low battery" warning light illuminates. This indicates approximately 5 to 6 minutes of shaving time left when first illuminated.

Model MS2-300 The green indicator light shows that the shaver is charging.This light will start to flash as the battery charge rate slows. A fully charged shaver will only flash intermittently. While

Position 2: Long hair intercept with floating action.

(Deployed by pressing LEFT side of trimmer button) Position 3: Sideburn / Mustache Trimmer (Deployed by pressing RIGHT side of trimmer button)

The Trimmer can be manually retracted at any time

by pressing down on the trimmer.

running,a red "low-battery" warning lamp illuminates when the shaver will soon need recharging. This indicates approximately 5 to 6 minutes of shaving time left when first illuminated.

Model MS2-200 The green indicator light shows that the shaver is charging.

MS2-100, MS2-200, MS2-90, MS2-300, MS2-400 specifications

The Remington MS series of electric shavers has become synonymous with precision, efficiency, and cutting-edge technology. Among these, the MS2-400, MS2-300, MS2-90, MS2-200, and MS2-100 stand out as models engineered to cater to diverse grooming needs. Each model exhibits unique features while sharing the core attributes that the Remington brand is known for.

Beginning with the Remington MS2-400, this shaver is equipped with a dual-track cutting system. This means more blades for a closer shave, reducing the number of strokes needed. Its advanced pivoting head adapts to the contours of the face, ensuring an even and comfortable experience. The model also boasts a lithium-powered battery, providing up to 60 minutes of runtime on a single charge. Additional features include a pop-up trimmer for precise detailing and a washable head for easy maintenance.

The Remington MS2-300, while slightly more compact, does not compromise on performance. Utilizing a similar dual-track system, it also features a three-stage LED battery indicator, giving users real-time feedback on battery life. The ergonomic design provides a comfortable grip, making it easy to maneuver. The MS2-300 is ideal for those seeking portability without sacrificing quality.

For entry-level users, the MS2-90 shines with its affordability and reliability. It incorporates a single rotary head design, but still manages to provide a smooth shave. The lightweight frame and ease of use make it an excellent choice for newcomers to electric shaving. Additionally, the shaver includes a protective cap to maintain hygiene and prolong the life of the blades.

Moving to the MS2-200, this model features an enhanced motor for superior performance. It's designed for individuals with heavier stubble, providing a powerful yet gentle shave. The ergonomic handle further complements its design by improving control. Advancements in blade technology mean reduced tugging and pulling, leading to a more pleasurable grooming experience.

Lastly, the MS2-100 is designed for those who prioritize convenience. It offers a travel lock feature, ensuring that the shaver remains off while stored. The MS2-100 also includes a quick charge option that allows users to achieve a full shave in just a few minutes of charging.

In summary, the Remington MS series covers a wide spectrum of user needs, from the high-end MS2-400 to the budget-friendly MS2-90. Each model encapsulates Remington's commitment to innovation, comfort, and versatility, making them top choices for anyone seeking an effective grooming solution.