Remington R-850 Getting Used To Your Shaver, To Shave, To Trim, Trim Sideburns, Trim mustache

Getting Used To Your Shaver

As with every shaver, your shaver will improve over time. So allow about three weeks to develop an effective shaving style and for your skin to adjust to the new shaver. The adaptation period may take a little longer if your skin is sensitive,if you are switching from a different way of shaving,or it your alter- nate between shaving methods.

To Shave

Push the on/off button locking bar inward and push upward on the on/off button to actuate the shaver for shav- ing.(Locking bar on rechargeable models only.)

To Trim

To use the Easy-View™pop-up trimmer, simply push the trimmer button up.The trimmer will pop-up for use.Hold the shaver as shown in the illustration. To conserve battery energy (on recharge -

able shavers only),it is recommended to use the trimmer only when needed for trimming.When through using,push the trimmer button downward to lock into the off position.

Trim Sideburns

Simply touch the comb-edge of the trimmer to the desired line for neat, clean sideburns.

Trim mustache

Hold shaver at desired trim line for a quick easy, professional trim.The trim- mer can also be used to trim the upper edge of your moustache.

Shaving Tips and Instructions

For a smoother, more comfortable,moisture free shave,use a Remington® Pre-Shave Powder Stick.For those who prefer

aliquid,use the non-greasy Remington® Pre Shave Lotion, specially formulated with a unique suspended powder and aloe for extra conditioning and protection.

Tips For Use

•Clean your shaver frequently.

•Always keep the protective headquard on the cutter head and keep the trimmer in the “off” position when the shaver is not in use.

•Before using,make sure that the cutter head assembly is in locked position.

•Wait at least 15 minutes after getting up before shaving.

•Thoroughly cleanse and dry skin prior to shaving.

•Your R-850 cord/cordless shaver should not be used strictly as a cord-operated shaver, as continued cord only use will result in reduction of battery life.

Operation Instructions

The MicroFlex™ shaver needs no adjustments to the heads or cutters before you shave.The floating heads will automatically adjust to the contours of your face.It is not necessary to apply pressure while shav- ing...let the shaver glide lightly on your skin.This gentle touch makes shaving easier and helps avoid possible skin irritation.

Cleaning Your Shaver

TO ASSURE SMOOTH, EFFICIENT PERFORMANCE, IT IS IMPORTANT TO CLEAN YOUR SHAVER. Cleaning your Remington® MicroFlex™ Shaver is easy.

Simply pull the head assembly out from the shaver by placing fingers on rib areas of head assembly. Using the brush supplied,clean the internal part of the head assembly and the hair pocket area,

where 3 shaver spindles are located. “At Least Once A Week”.

For more complete cleaning,remove the cutter retainer assembly from the head assembly by unscrewing the center screw knob and clean with brush.After cleaning put the cutters

back in position.Place the cutter retainer back into position. Important! Make sure to align the two locat- ing holes in the Cutter Retainer assembly with the pins in the Head Frame Assembly.(See below).Then tighten centerscrew knob to lock cutters into place. Put head assembly onto the shaver

simply by pushing in onto the shaver. Replace the plastic head- guard after cleaning.When remov- ing the headguard or placing it back onto the shaver, do not apply pressure to floating cutter surface as you may damage them. Never clean the shaver or replace the

cutters while it is plugged into electrical outlet.

Cutter Retainer	Head/Frame
Assembly	Assembly
	Center
	Screw
	Knob

		Floating
Locating Holes	Locating Pins	Cutter
		Heads