Panasonic MC-CL481K, MC-CL483K important safety instructions Vacuum cleaner body

Floor nozzle / /

D - 10 Inspect once a month.

Using an old toothbrush or similar tool, clean any dirt or lint from the brush.

. D –

.

. D –

.

Vacuum cleaner body / /

D - 11 Wipe with the soft cloth soaked with water.

. D –

. D –

Maintaining the Pre-motor filter / /

D - 12 Push the dust compartment buckle and pull up the dust compartment from the main body.

D - 13 Remove the filter.

D - 14 Wash gently with water and then allow to dry in a shaded location.

D - 15 Replace to its original location.

NOTE:

Make sure you remember to replace the filter. If the filter is not install, it will cause motor failure. Do not wash the filter in a washing machine or dry it with a dryer or other source of hot air.

. D –

. D –

. D –

. D – :

. .

.

. D –

. D –

. D –

. D – :

. .

.

What to do if your cleaner does not work / /

Check that the appliance is correctly plugged in and that the socket outlet is working. In case that the thermal cut-off device has operated, wait until it resets after approximately 60 minutes. If after having checked the mentioned points, the cleaner does not work, take it to an Authorized Service Centre to be repaired.

	.	.
	.
	.	.	.
What to do it the suction performance reduces /		/
•	Stop the cleaner and unplug from the socket outlet.
•	Check whether the wands, hose and accessories are blocked or not. If they are
	blocked, remove the obstruction.
•	Check that the dust compartment is full. If it is full, empty it.
•	Check that filter is blocked with dust. If it is blocked with dust, clean it first.	.	•
	.	.	•
		.	•
	.	.	•
		.	•
	.	.	•
	.	.	•
	.	.	•

7