Panasonic MC-CL483K, MC-CL481K Maintenance and Servicing, Maintaining the filter assembly

Page 6

D - MAINTENANCE AND SERVICING / /

CAUTION

The plug must be removed from the socket outlet before cleaning or maintaining the appliance.

To avoid injury, keep your fingers and hands away from the beater bar.

DO NOT use hot air or hot surface to dry filter. Keep at room temperature for approximately 24 hours.

IMPORTANT : Before re-installing the washable filter, make sure they are completely dry to avoid damaging the cleaner.

 

.

 

 

.

 

.

.

 

 

.

:

 

.

 

 

.

 

.

.

 

.

 

:

 

 

 

 

How to empty the dust compartment /

/

 

 

IMPORTANT / /

• Empty the dust compartment when it is full or the suction power seems to be bad.

.

.

NOTE / /

When vacuuming fine dust, such as powder or similar, there may be a loss of suction power. If this happens, empty the dust compartment and check for possible dust trapped on the filters.

. .

.

D - 1 Push the dust compartment buckle and pull up the dust compartment from the main body.

D - 2 Rotate the slider for 5 times.

D - 3 Pull out the filter assembly from the dust compartment.

D - 4 Empty the dust compartment.

D - 5 Place back the filter assembly into the dust compartment.

NOTE:

Be sure to use the cleaner with the filter assembly at the dust compartment.

D - 6 Set the dust compartment into the main body. Return dust compartment buckle to an original position. (Press until it "clicks")

.

 

 

 

 

 

.

D –

 

 

 

 

 

.

D –

 

 

 

 

 

.

D –

 

 

 

 

 

 

D –

 

 

 

 

 

.

D –

 

 

 

 

 

.

:

 

 

 

 

 

 

 

(

"

"

) .

.

D –

 

 

 

 

.

 

D –

 

 

 

 

 

.

D –

 

 

 

 

 

.

D –

 

 

 

 

 

.

D –

 

 

 

 

 

.

D –

 

 

 

 

 

 

:

 

 

 

 

.

 

 

(

" "

) .

 

 

.

D –

Maintaining the filter assembly / /

D - 7 Unlock the Pre-filter and pull it up as illustrated.

D - 8 Remove the dust accumulated in the filter unit by tapping it against a hard surface lightly.

NOTE:

Don't clean the filter unit by brush or clean it with water.

D - 9 Reinstall the filter unit as per reverse procedure.

.

D –

.

D –

 

:

.

 

.

D –

.

D –

.

D –

 

:

.

 

.

D –

6

Image 6
Contents MC-CL483K Table of Contents NIM HOW to Assemble Your Cleaner Identification of Main PartsHOW to Operate Your Cleaner Maintenance and Servicing Maintaining the filter assemblyVacuum cleaner body XAM Specifications MC-CL481KMemo Memo Panasonic Manufacturing Malaysia Berhad 6100-K