6 | en Installing the | |
|
|
|
3.Tighten the four (4) bracket securing screws located in each corner.
Figure 2.3 Bracket Securing Screws
4.Secure the bracket assembly to an overhead securing point using a
Figure 2.4 Safety Cable Fitment
5.Use two (2) pencils (or a pencil and nail) and the template tool to trace a 200 mm diamter hole with a tolerance of ±2.2 mm (7.8 in. ± 1/8 in.) in the center of the mounting plate.
6.Drill or cut the hole out of the suspended ceiling tile.
7.Install the unit as instructed in the AutoDome Junior HD User’s Manual.
F.01U.170.693 2.0 2010.08 | Installation Guide | Bosch Security Systems, Inc. |