2 | Installing the |
To secure the
1.Locate the bracket assembly at the desired location. Loosen the securing screws on the base bracket assembly (refer to Figure 2.3) enough to retain the suspension bars during handling, but allowing adjustment during installation.
Figure 2.1 Ceiling Mounting (Top View)
1 | Ceiling Tile |
2 | Suspension Bars |
3 | Ceiling Base Bracket |
4 | Securing Screw |
5 | Bracket Clip |
2.Snap the bracket clips over the ceiling rails. Slide the base plate to the desired position on top of the tile.
Figure 2.2 Bracket Clip Fitting
Bosch Security Systems, Inc. | Installation Guide | F.01U.170.693 2.0 2010.08 |