Aiphone TL-2000 operation manual Software, Loading, Connection Parameters screen opens

Page 21

Software:

Click on Software

The Program in the panel box details the version of software that is being used and allows you to select different versions to use. This is used to update installations with the latest software releases.

Loading:

All programming changes made using the TL-2000 application software must be uploaded from the PC to the panel to take effect.

Click on Loading

The Data Transfer screen opens.

Click on Configure

Current Status

The Connection Parameters screen opens.

Connection to the TL-2000 panel can be made in two ways:

1.From a COM (Serial) Port of a Laptop or PC to connector CN6 on the PCB of the panel using a DB9 (null modem) serial cable.

2.Remotely from a PC via an analog modem (max speed 33,600 bps) via the phone line.

Click OK when done. The Data Transfer window will display again.

Select the COM port if connecting locally.

Select which modem to use if connecting via the phone line.

A new Data Transfer screen will display showing the status as “ON LINE”.

Click on

Connect Now

Pg. 21

Image 21

Contents Distributed by Aiphone Table of Contents Page JP2 connections for direct call buttons TL-2000 Connection diagramTL-2000 Basic set up instructions for Installer General Screen InstallationInstallations Screen Existing installationNew installation Details of Installation Screen Configuration of Installation ScreenComms ends after relay 1, checking Configuration of Installation Screen Period Types Period Types Message Volume on Speaker controls Screens & Keypad ParametersMessages Message # Pre-recorded Message Event Type Dialing & Call Progress DetectionCaretaker Managing Agent Installation CompanyCall-Buttons Sharing Telephone LinesDo not check the Network On for Modules box Residents and Access Residents and Access Services Access OnlyCall Log ScreensAudio Messages Software LoadingConnection Parameters screen opens Uploading / Updating Panel Downloading / Updating PCEach section must be uploaded separately General Information Keypad codesComments Exit PrintingHelp Update Managing Agent Keypad Code window will display Update Menu General ScreenUpdating of Installations window will display Update Installation Company Keypad Code window will displayUpdate Menu General Screen Options Menu General Screen CTR21 SpecificationsDefault Messages Default Parameters