Carson Horn System Mounting, Amplifier, Speaker, Switch Panel, Electrical Connections

Page 4

Page 4 of 8

HPK-150 Installation and Operating Instructions

MOUNTING

Amplifier

The amplifier is waterproof and may be located under hood in the engine compartment or other areas. Allow clearance for wiring. Inspect behind mounting area for clearance. Use #8 screws (supplied loose) for mounting.

Speaker

The speaker is weather resistant and is intended to be mounted on the outside of the vehicle or under front hood. Mount the speaker facing forward and as far forward on the vehicle as possible to minimize sound exposure to occupants. Choose a location that minimizes obstructions in front of the speaker to maximize forward sound. Attach the speaker to a sturdy part of the vehicle to prevent vibration and possible damage. Attach the speaker angled slightly toward the road so the front openings will drain off any fluids. Cover openings of speaker while drilling any holes.

DO NOT get metal shavings inside the speaker.

Switch Panel

Mount the switch panel underneath the vehicle dash board using #8 screws (supplied loose). Locate the panel away from the driver’s or passenger’s legs. Allow clearance for wiring. Inspect behind mounting area for clearance. Make all electrical connections before final mounting.

ELECTRICAL CONNECTIONS

Amplifier

Electrical connections to the amplifier are made using butt splices (not supplied). The butt splices need to be waterproof when unit is mounted under hood or other weather susceptible areas. A label on the amplifier identifies each lead function. An in-line fuse is provided on the amplifier. The power supply for the amplifier must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation. Most vehicle horn circuits with relays provide adequate power on the vehicle horn side of the relay. However do not provide power to both the vehicle horn and this amplifier from one horn relay circuit as this will exceed circuit rating.

NOTE: Permanent disconnection of the vehicle horn is NOT recommended.

Switch Panel

Electrical connections to the switch panel are made using 3/16” quick-connect terminals (supplied loose).

Wire Size and Termination - The diagram shows the minimum wire size used for each connec- tion, along with recommended lead color. If the wire is longer than 10 ft. use the next larger wire size. Use only high quality crimp connectors for installation on the vehicle.

02/05/10

CP5061A

Image 4
Contents Horn System Phone 888 577-6877 Fax 317Specifications Switch Panel SP-200General Description Amplifier HA-150-10Installation Safety PrecautionsUnpacking QtySwitch Panel MountingAmplifier SpeakerRecommended Wire Size Under HoodUsing Switch Panel Electrical Connections Not Using Switch PanelOperation Problems ServiceParts and Accessories Limited Warranty Return

Horn System specifications

The Carson Horn System is an advanced audio technology designed to deliver exceptional sound quality in various environments, from small spaces to expansive venues. This innovative system is engineered to provide clear and balanced audio while minimizing distortion, making it an ideal choice for professional audio applications such as live performances, installations, and public address systems.

One of the main features of the Carson Horn System is its unique horn design. The horn structure enhances sound dispersion and projection, allowing audio to reach a wider audience with minimal loss of quality. This makes it particularly effective in outdoor settings or large auditoriums where sound clarity is crucial. The horn design also helps to reduce feedback issues, a common challenge in live sound situations, ensuring that the sound remains crisp and intelligible.

In terms of technology, the Carson Horn System boasts cutting-edge speaker drivers that are meticulously crafted for optimal performance. These drivers are designed to handle high power levels while providing a wide frequency response, allowing for rich bass tones and clear mid and high frequencies. The integration of durable materials in the construction of the drivers ensures longevity, making the system a reliable choice for frequent use.

Another characteristic of the Carson Horn System is its versatility. It can be configured in various ways to suit different setups, whether as standalone units or in a multi-speaker array. This flexibility allows audio professionals to tailor the system to meet specific acoustical requirements while maintaining outstanding sound quality. Furthermore, the system is compatible with a wide range of amplifiers and audio processors, enabling users to integrate it seamlessly into existing setups.

The Carson Horn System also prioritizes ease of use. Setup is straightforward, with user-friendly connectors and options for both wired and wireless configurations. This design consideration reduces the complexity often associated with professional audio systems, enabling technicians to focus on performance rather than troubleshooting technical issues.

Overall, the Carson Horn System is a state-of-the-art audio solution that combines innovative horn technology, high-performance drivers, and user-friendly features to provide an unmatched sound experience. Whether in a concert hall, conference center, or outdoor festival, the Carson Horn System is engineered to meet the demands of any professional audio environment.