Carson Horn System operating instructions Service, Problems, Parts and Accessories

Page 7

HPK-150 Installation and Operating Instructions

Page 7 of 8

SERVICE

The complete system consists of the amplifier, speaker, and switch panel components along with the wiring and electrical connections. A blown fuse on the amplifier does not necessarily mean the amplifier is bad. If the system stops functioning or exhibits problems, first check that the wire and electrical connections to each component are OK then check the following.

On the switch panel, check for power into (center terminal) and out of the switch. On the HORN SELECT switch, check for power while pressing the horn ring. If there is not power into the switch, check wire for bad connections and check fuses or breakers in the circuit. If there is power into but not out of the switch, the switch itself may be bad.

While activating the amplifier (with horn ring), look for the power indicator to light up. If it lights up the amplifier is OK. If not, check the fuse on the amplifier. If the fuse is OK then check the RED and BLK power input leads for good supply and ground connections. If power into the amplifier is OK then the amplifier may be bad.

If the fuse on the amplifier is blown, disconnect the speaker leads at the amplifier and replace the fuse. As before, activate the amplifier and look for the power indicator to light up. If the fuse blows again then the amplifier may be bad.

If the power indicator on the amplifier lights up, disconnect the leads at the speaker and check the speaker inputs with an ohm meter. If the reading is less than 1 ohm or reads as open circuit then the speaker may be bad. If the ohm meter reading is OK then the wiring or connections between the amplifier and speaker may be faulty.

The following chart shows typical symptoms and possible causes.

PROBLEMS

Symptom

Possible Cause

Check

No power or

Power not applied

Is the power indicator light coming on?

output

Connections loose

Is an external fuse or circuit breaker used?

 

In-line fuse blown

Are the negative leads connected to a good ground?

 

Loose connection at power source

 

 

Bad speaker

Try another speaker.

Distorted sound

Speaker assembly loose

Is the speaker bell or tip loose?

 

Low vehicle voltage

Input voltage must be greater than lowest rated voltage.

Intermittent tone

Connections loose

Are the splice connections tight on the unit?

 

Bad power connection

Is there a loose connection on a power lead?

 

Circuit breaker in supply connection

Is a circuit breaker used with at least a 50A rating?

PARTS and ACCESSORIES

The following parts and accessories are available from Carson Manufacturing Company, Inc.:

Part

Description

 

CP4990-150

Fuse, 15 Amp Mini Automotive (for amplifier)

CP4993

Switch, Lighted Rocker (Lite switch on panel)

CP5044-2

Switch, Red Rocker ON - ON (Horn Select switch on panel)

 

 

 

Accessory

Description

* - standard accessory supplied with unit

ED1924

Cable, 6-P Lead Assembly 15FT (made w/ 3/16” Q.C. Terminals) (for switch panel)

CP4051-XK-12 *

Screw, Hex #8 Self Drilling (for mounting)

CP4062-K2545 *

Terminal, 3/16” Insulated Fem. Q.C. (for switch panel)

CP5061 *

Manual, HPK-150 Instruction

See www.carson-mfg.com for additional information.

or contact our Service Department at:

E-mail service@carson-mfg.com or Phone (888) 577-6877

CP5061A

02/05/10

Image 7
Contents Phone 888 577-6877 Fax 317 Horn SystemAmplifier HA-150-10 SpecificationsSwitch Panel SP-200 General DescriptionQty InstallationSafety Precautions UnpackingSpeaker Switch PanelMounting AmplifierUnder Hood Recommended Wire SizeUsing Switch Panel Electrical Connections Not Using Switch PanelOperation Problems ServiceParts and Accessories Return Limited Warranty

Horn System specifications

The Carson Horn System is an advanced audio technology designed to deliver exceptional sound quality in various environments, from small spaces to expansive venues. This innovative system is engineered to provide clear and balanced audio while minimizing distortion, making it an ideal choice for professional audio applications such as live performances, installations, and public address systems.

One of the main features of the Carson Horn System is its unique horn design. The horn structure enhances sound dispersion and projection, allowing audio to reach a wider audience with minimal loss of quality. This makes it particularly effective in outdoor settings or large auditoriums where sound clarity is crucial. The horn design also helps to reduce feedback issues, a common challenge in live sound situations, ensuring that the sound remains crisp and intelligible.

In terms of technology, the Carson Horn System boasts cutting-edge speaker drivers that are meticulously crafted for optimal performance. These drivers are designed to handle high power levels while providing a wide frequency response, allowing for rich bass tones and clear mid and high frequencies. The integration of durable materials in the construction of the drivers ensures longevity, making the system a reliable choice for frequent use.

Another characteristic of the Carson Horn System is its versatility. It can be configured in various ways to suit different setups, whether as standalone units or in a multi-speaker array. This flexibility allows audio professionals to tailor the system to meet specific acoustical requirements while maintaining outstanding sound quality. Furthermore, the system is compatible with a wide range of amplifiers and audio processors, enabling users to integrate it seamlessly into existing setups.

The Carson Horn System also prioritizes ease of use. Setup is straightforward, with user-friendly connectors and options for both wired and wireless configurations. This design consideration reduces the complexity often associated with professional audio systems, enabling technicians to focus on performance rather than troubleshooting technical issues.

Overall, the Carson Horn System is a state-of-the-art audio solution that combines innovative horn technology, high-performance drivers, and user-friendly features to provide an unmatched sound experience. Whether in a concert hall, conference center, or outdoor festival, the Carson Horn System is engineered to meet the demands of any professional audio environment.