Important Safety Instructions for the User

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS FOR THE USER

Before using the vacuum cleaner, please observe these basic precautions.

WARNING: To reduce the risk of ﬁre, electric shock, or injury

•This appliance is not intended for use by young children or inﬁrm person without supervision; young children should be supervised to ensure that they do not play with the appliance.

•Do not use the appliance if the mains lead or plug is damaged or faulty.

•This appliance is provided with a mains lead and if this becomes damaged, it must be repaired by an Authorised Service Centre or a qualiﬁed person in order to avoid any hazard.

•Unplug from the socket when not in use and before cleaning the appliance or undertaking maintenance operations.

•Turn off the appliance before removing the plug. Do not pull on the mains, always pull on the plug body itself.

•Do not handle plug or vacuum cleaner with wet hands.

•Do not use wet ﬁlters after wash, make sure they are completely dry to avoid damaging the cleaner.

•Do not vacuum ﬂammable or combustible substances, neither use in areas where they may be present.

•Do not vacuum hot ash, embers or large and sharp objects.

•Do not vacuum water or other liquids.

•Keep the vacuum cleaner away from heat sources such as radiators, ﬁres, direct sunlight, etc.

•This vacuum cleaner is ﬁtted with a thermal cut-out device which automatically turns off the cleaner to prevent overheating of the motor. When this happens, disconnect the cleaner from the mains socket and check the dust compartment and ﬁlters as they may be full or clogged with ﬁne dust. Check for any other obstructions in the hose or tube. After removing the obstruction, leave the cleaner to cool down until the thermal cut-out resets after approximately 60 minutes.

A- IDENTIFICATION OF MAIN PARTS

A)Turbine nozzle (Only MC-CG467)

B)Ionizer nozzle (Only MC-CG465)

C)Floor nozzle

D)Connection pipe

E)Hose

F)Suction regulator

G)Curved wand

H)Telescopic wand (MC-CG467)

(MC-CG465, MC-CG463)

I ) Extension wand (MC-CG461)

J)Hose inlet

K)Dust indicator

L)Dust cover

M)ON /OFF Switch pedal

N)Cord rewind pedal

O)Crevice nozzle

P)Dusting brush

Q)Exhaust cover

R)Plug

S)Variable power control button

B - HOW TO ASSEMBLE YOUR CLEANER

B-1Insert connection pipe into hose inlet until it locks. When removing hose assembly, pull out connection pipe with pushing down two connection buttons.

NOTE: Do not bend, pull and step on the hose or put anything heavy on it.

B-2Connect the two extension wands by inserting one into the other and twisting together. (depending on model)

B-3Insert the hose unit into the upper end of the connected extension wand or telescopic wand and the ﬂoor nozzle to the other end.

(depending on model ).

B-4Insert the hose unit into the upper end of the telescopic wand. Twist the telescopic wand so that the round hole will ﬁt into the tab on the hose unit. (When removing the hose, push the tab down whilst pulling on the telescopic wand)

Attach the Turbine Nozzle to the other end (depending on model)( Removal as per reverse procedure)

B-5You can adjust the length of telescopic wand by pushing button. (depending on model)

C - HOW TO OPERATE YOUR CLEANER

C-1 Pull out the power cord and put the plug into the wall socket.

C-2 Gently press at the centre of the switch pedal to turn ON the vacuum cleaner.

Press the pedal again to turn it OFF.

C-3 Power control

To increase or decrease the power, turn the variable power control button.

C-4 Switching between carpet and ﬂooring

Flooring: Press lever A

Carpet: Press lever B

*Switching 3 positions for MC-CG467.

Flooring (PARQUET): Set position A

Carpet (short): Set position B

Carpet (long or hard to push): Set position C

C-5The curved wand of the hose is attached with a manual suction regulator, which allows you to brieﬂy reduce the suction level.

C-6 After you ﬁnish vacuuming, remove the plug from the wall socket and press the cord rewind pedal.

When rewinding the power cord, press the cord rewind pedal by holding the plug so that it does not become damaged.

C-7 Storage position

Insert the wand holder straight into the wand supporter.

C-8 Park system

For short breaks during vacuuming, slide the hook attached to the nozzle pipe into the slot on the rear side of the cleaner.

NOTE: When you use park position, we suggest the appliance is switched off.

MC-CG463, MC-CG465, MC-CG461 specifications

The Panasonic MC-CG461, MC-CG465, and MC-CG463 are part of an impressive line of canister vacuum cleaners designed for efficient cleaning while ensuring user convenience. Each model boasts features tailored to meet various cleaning needs and preferences.

One of the standout characteristics of these models is their powerful motor. The advanced motor technology delivers remarkable suction capabilities, ensuring that fine dust and larger debris are efficiently picked up from various surfaces, including carpets and hard floors. The vacuums are also equipped with a robust filtration system, including a HEPA filter option in some models, which captures allergens and provides cleaner air in the home, making it an excellent choice for allergy sufferers.

In terms of design, the MC-CG series is crafted for ease of use. Each model features a lightweight and compact body, allowing users to maneuver the vacuum effortlessly around the home. The flexible hose and multiple attachment options enable reaching tight spaces, corners, and crevices, ensuring that no area is left uncleaned. The ergonomic handles enhance comfort during prolonged use, reducing strain on the user.

Another significant feature of the MC-CG461, MC-CG465, and MC-CG463 is their variable suction control. This technology allows users to adjust the suction power according to the type of surface being cleaned. Whether vacuuming delicate fabrics or more robust carpets, users can customize the performance for optimal results.

The MC-CG465 model includes additional features such as an automatic cord rewind mechanism, simplifying storage and ensuring that the cord is neatly tucked away when not in use. The noise-reduction technology incorporated into these models minimizes operational sounds, allowing for quieter cleaning sessions.

Panasonic has also prioritized durability in these vacuum cleaners. The sturdy construction means that users can rely on them for long-term performance, making them a wise investment for maintaining a clean home environment.

Whether opting for the MC-CG461, MC-CG465, or MC-CG463, consumers can expect a blend of power, convenience, and user-friendly features. These models cater to a range of cleaning tasks, ensuring that Panasonic continues to be a trusted name in home cleaning solutions.