using irritating substances such as deo- dorants with alcohol.
Overheating protection
As a safety feature to avoid the unlikely event of the appliance overheating, it may happen that it automatically switches off and the charging lights flash (red/green). In this case, turn the switch back to the position «0» and let the appliance cool down.
Cleaning the epilation head
Before cleaning, unplug the appliance. Regular cleaning ensures better performance.
Brush cleaning:
5Remove the cap and brush it out.
6Thoroughly clean the tweezers from the rear side of the epilator head with the brush dipped into alcohol. While doing so, turn the tweezer element manually. This cleaning method ensures best hygienic conditions for the epilation head.
Cleaning under running water:
7Remove the cap. Hold the appliance with the epilation head under running water. Then press the release button (6) to remove the epilation head (2). Thoroughly shake both, the epilation head and the appliance to make sure that remaining water can drip out. Leave both parts to dry. Before reattaching, make sure that they are completely dry.
B Using the shaver head attachment
aOptiTrim comb
bShaver foil
cTrimmer
dRelease buttons
eTrim/shave selector
fCutter block
gShaver head base
Shaving
•Put on the shaver head attachment (8) by clicking it in.
•Pressing one of the lock keys, turn the switch clockwise to setting 2.
•Make sure the trim/shave selector is in the «shave» position.
•For best results, always make sure that both, the shaver foil (b) and the trimmer (c) are in contact with the skin (A). Keeping your skin stretched (B), slowly move the appliance against the direction of hair growth. The trimmer first raises all long hairs and cuts them off. Then the flexible foil follows to smooth away any stubble.
•When shaving or trimming in sensitive areas, make sure that you always keep your skin stretched to avoid injuries.
Contour trimming
For trimming precise line and contours, lock the long hair trimmer by sliding the trim/ shave selector (e) to the position «trim» (C1).
Pre-cutting hair for epilation
If you choose to
(a)onto the shaver head. Slide the trim/shave selector to the «trim» position.
Hold the appliance with the OptiTrim comb lying flat on the skin. Guide it with the comb tips against the hair growth as shown in illustration C2.
N.B. As hair does not always grow in the same direction, also guide the appliance slightly diagonally or in different directions in order to achieve best results.
9