Panasonic EQ-500 Series manual Specifications, Type Model No, Multi-voltage DC-voltage With timer

EQ-500

SPECIFICATIONS

Type

Item Model No.

Adjustable range (Note 1) (Note 2)

Sensing range (at maximum setting distance) (Note 2)

Hysteresis

Supply voltage

Power / Current consumption

Output

Output operation

Short-circuit protection

Response time

Operation indicator

Stability indicator

Distance adjuster

Sensing mode

Timer function

Automatic interference prevention function

resistance	Protection
	Ambient temperature
	Ambient humidity
Environmental	Ambient illuminance
	Vibration resistance
	Voltage withstandability
	Insulation resistance
	Shock resistance

Emitting element

Receiving element

Material

Connection method

Cable

Cable length

Weight

Accessory

	Multi-voltage				DC-voltage
	With timer		With timer		With timer		With timer
EQ-501	EQ-501T	EQ-502	EQ-502T	EQ-511	EQ-511T	EQ-512	EQ-512T
0.2 to 2.5 m 0.656 to 8.202 ft		0.2 to 1.0 m 0.656 to 3.281 ft		0.2 to 2.5 m 0.656 to 8.202 ft		0.2 to 1.0 m 0.656 to 3.281 ft
0.1 to 2.5 m 0.328 to 8.202 ft		0.1 to 1.0 m 0.328 to 3.281 ft		0.1 to 2.5 m 0.328 to 8.202 ft		0.1 to 1.0 m 0.328 to 3.281 ft
		10 % or less of operation distance
24 to 240 V AC 10 % or 12 to 240 V DC 10 %				12 to 24 V DC10 % Ripple P-P 10 % or less
Ripple P-P 10 % or less
AC: 4 VA or less	AC: 5 VA or less	AC: 4 VA or less	AC: 5 VA or less		45 mA or less
DC: 3 W or less	DC: 4 W or less	DC: 3 W or less	DC: 4 W or less
				NPN open-collector transistor
Relay contact 1a				• Maximum sink current: 100 mA
				• Applied voltage: 30 V DC or less (between output and 0 V)
• Switching capacity: 250 V AC 3 A (resistive load)
				• Residual voltage: 1 V or less (at 100 mA sink current)
	30 V DC 3 A (resistive load)
					0.4 V or less (at 16 mA sink current)

•Electrical life: 100,000 or more switching operations

		(switching frequency 1,200 operations/hour)			PNP open-collector transistor
						• Maximum source current: 100 mA
	• Mechanical life: 50 million or more switching operations
						• Applied voltage: 30 V DC or less (between output and V)
		(switching frequency 18,000 operations/hour)
						• Residual voltage: 1 V or less (at 100 mA source current)
							0.4 V or less (at 16 mA source current)
			Switchable either Detection-ON or Detection-OFF
							Incorporated
20 ms or less (For EQ-50 Tdepends on the setting timer period)					2 ms or less (For EQ-51 Tdepends on the setting timer period)
			Orange LED (lights up when the output is ON)
			Green LED (lights up under stable operating condition)
			2-turn mechanical adjuster with indicator
						Switchable either BGS or FGS function
		Incorporated		Incorporated
							Incorporated	Incorporated
		with variable		with variable			with variable	with variable
		(0.1 to 5 sec.)		(0.1 to 5 sec.)			(0.1 to 5 sec.)	(0.1 to 5 sec.)
		ON-delay /		ON-delay /			ON-delay /	ON-delay /
		OFF-delay timer		OFF-delay timer			OFF-delay timer	OFF-delay timer

Incorporated (Note 3)

IP67 (IEC)

20 to 55 C 4 to131 F (No dew condensation or icing allowed), Storage: 30 to70 C 22 to158 F

35 to 85 % RH, Storage: 35 to 85 % RH

Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving face

2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts

100 M , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts

10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each

500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each

Infrared LED (modulated)

2-segment photodiode

Enclosure: ABS, Front cover: Polycarbonate, Display cover: Polycarbonate

Screw-on terminal connection

Suitable for round cable "9 to"11 mm "0.354 to "0.433 in

Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable

100 g approx. 85 g approx.

Adjusting screwdriver: 1 pc.

Notes: 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.

2)The adjustable range and the sensing range are specified for white non-glossy paper (200200 mm 7.8747.874 in) as the object.

3)Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. Refer to ‘Automatic interference function’ (p.8) of ‘PRECAUTIONS FOR PROPER USE’ for details.

198 08/2005