Braun 6084, 6085 manual What to do if, Problem Reason Solution

What to do if ...

Problem		Reason	Solution
		Batteries are flat.	Insert new batteries.
		Memory readings can be
		called up.
		Measurements are not
		possible.
	(flashing)
e.g.		Error codes 01-29:	Refit device and repeat
................		Device may not be	measurement as shown and
		correctly positioned on	described under «Measuring».
		the wrist.
e.g.		Error codes 30 and	Repeat measurement. If problem
................		higher:	persists, have device checked at a
		System error	Braun Service Centre.
Measurement		Right measuring position	Repeat measurement as shown
or inflation		was not reached.	and described under «Measuring»
does not start			or deactivate the positioning
instantly.			system (A).
Readings from		Blood pressure is a	none
repeated mea-		fluctuating value.
surements differ		For healthy adults,
considerably.		deviations of about 10 to
		20 mmHg are possible.
		Cuff is not properly fitted.	Ensure that the appliance is fitted
			as follows:
			– on top of the slim side of the
			forearm
			– with the display on top
			– with the battery compartment
			facing the user’s body
			– approx. 2 cm away from the
			thumb root
		Readings were not con-	For each measurement, proceed
		sistently taken at heart	exactly as shown and described
		level.	under «Measuring».
		Talking, coughing,	While measuring, relax, keep still,
		laughing, moving etc.	do not move, or speak.
		when measuring will
		influence the reading.
Prior to a		Positioning system (A) is	Refer to the chapter «Select mode»
measurement,		deactivated.	to activate the positioning system
the positioning			(A).
system (A) on the
display does not
work.

12