5.The positioning system (A) shown on the left and a beep confirm that you have reached the right measuring position. The measurement will start automatically. When the measurement is complete,
a beep will sound again, and the reading is displayed along with the feedback from the confirmation system (B):
Upper (systolic) value Lower (diastolic) value Pulse
Confirmation system (B)
The green dot in the lower left corner of the display confirms that the measurement conditions have been okay. If not okay, a red dot is flashing and the positioning system (flashing arm) shows the reason for the measuring error:
Measuring arm: too low . . . too high
Arm movement during measurement
Please note:
•In case of system errors or handling mistakes, the display will show an error code, instead of giving you inaccurate results (for details, please see section «What to do if…»).
•15 seconds after switching on the appliance, the measuring process will start automatically, even if the appropriate measuring position has not been reached.
8