page 4) and push the «set» or «h/min» button.
A flashing «12:00» indicates that you can now adjust the clock time.
Clock time
Press and hold the «set» button until «12h» is displayed. By briefly pressing the «h/min» button, you can toggle between «12h» or «24h» daytime format. Push «set» to confirm your choice. Then the hour digit starts flashing. Press the «h/min» button until the right hour appears and confirm with «set». Proceed same way to set both minute digits (picture B, page 4). If you prefer not using the clock feature, the flashing «12:00» will disappear auto- matically after 24h.
SmartGuide Icons
Displayed Meaning
Icon
«Daily Clean» mode
«Deep Clean» mode
«Sensitive» mode
«Polish/Whitening» mode
«Gum Care» mode
Too much pressure is applied.
Reduce the brushing force.
«Quadrant circle»
Move to the next quadrant of your mouth when the relevant segment flashes.
You reached the dentist recom- mended
You will receive a star with each completed quadrant.
Smart Guide Batteries are low.
Change batteries of the SmartGuide.
Using your toothbrush
Brushing technique
Wet brush head and apply toothpaste; you can use any kind of toothpaste. To avoid splashing, guide the brush head to your teeth before switching the appliance on (c). Guide the brush head slowly from tooth to tooth, spending a few seconds on each tooth surface. Start brushing the outsides, and then the insides and finally the chewing surfaces (picture 3, page 5). Brush all four quadrants of your mouth equally.
In the first days of using any electric toothbrush, your gums may bleed slightly. In general, bleeding should stop after a few days. Should it persist after 2 weeks, please consult your dentist or dental hygienist. If you have sensitive teeth and gums,
Timer
You can choose between «Professional» or
The
In addition the «Professional» timer signals with short beep sounds at
The timer memorizes the elapsed brushing time, even when the handle is briefly switched off during brushing. The timer resets if pausing longer than 30 seconds or briefly pressing the mode button (d) during pause.
The «Count Up» timer displays your actual brush- ing time. The «Count down» timer indicates the remaining brushing time.
Personalizing the timer
Your toothbrush comes with the «Professional» and «Count up» timer activated. To change this, press and hold the brushing mode button for 3 seconds until the SmartGuide shows «:30» and «timer». Briefly press the on/off button to switch to the
16