Philips PT728, PT722 manual Shaving unit

14English

-- Clean the inside and outside of the shaving guard with the brush.

6 Put the shaving heads back into the shaving unit.

PT880, PT860/PT735/PT730/PT722: Make sure that the projections of the shaving heads fit exactly into the recesses.

7Put the retaining frame back into the shaving unit and turn the lock clockwise.

		8 Insert the lug of the shaving unit into the slot
1		in the top of the shaver (1).Then close the
	2	shaving unit (2).

Note: If the shaving unit does not close smoothly, check if you have inserted the shaving heads properly and if the retaining frame is locked.

Cleaning the trimmer with the cleaning brush (PT880, PT860 only)

Clean the trimmer every time you have used it.

1Switch off the shaver and disconnect it from the mains.