Philips PT728, PT722 manual Accessories

16English

1Switch off the shaver and disconnect it from the mains.

	2	Press the release button to open the shaving
		unit.
	3	Pull the shaving unit off the shaver.
2	4	Turn the lock anticlockwise (1) and remove the
	1	retaining frame (2).
	5	Remove the shaving heads and place new ones
		in the shaving unit.
	Make sure that the projections of the shaving
	heads fit exactly into the recesses.
	6	Put the retaining frame back into the shaving
		unit and turn the lock clockwise.
	7	Insert the lug of the shaving unit into the slot
1		in the top of the shaver (1).Then close the
	2	shaving unit (2).
	Note: If the shaving unit does not close smoothly, check
	if you have inserted the shaving heads properly and if
	the retaining frame is locked.
	Accessories
	To retain the top performance of your shaver, make
	sure you clean it regularly and replace its shaving

heads at the recommended time.